Справочник Пользователя для Sony 3-869-574-12(1)
42
Menu Contents
C
h
ap
te
te
r 4
M
e
e
nu
S
e
S
e
tti
n
gs
FROM STILL [> From STILL]:
Set the time to switch from
still search mode to tape
protection mode. Also select
the type of tape protection
mode.
still search mode to tape
protection mode. Also select
the type of tape protection
mode.
STILL TIMER [>> STL
timer]: Set the time to
switch from still search
mode to tape
protection mode.
switch from still search
mode to tape
protection mode.
5 MIN [>>> 5 min] to 0.5 SEC [>>> 0.5 sec]: Select time from
12 settings ranging from 0.5 second to 5 minutes in steps
of 0.1 second.
of 0.1 second.
Factory default setting: 1MIN [>>> 1min]
Note
If the value is set to 1 minute or more, the unit enters internal
protection mode in 1 minute, which makes start up slower.
protection mode in 1 minute, which makes start up slower.
NEXT MODE [>> Next
mode]: Select the type
of tape protection
mode to follow still
search mode when the
time set with the STILL
TIMER menu item
elapses.
of tape protection
mode to follow still
search mode when the
time set with the STILL
TIMER menu item
elapses.
*
STEP FWD [>>> Step]: The tape is advanced at
1
/
30
times
normal speed for about 2 seconds.
STANDBY OFF [>>> STANDBY]: Standby off mode
Note
The STEP setting is enabled only when “STILL TIMER” is set
to less than 1 minute.
to less than 1 minute.
VIDEO CONTROL [Video]: Settings related to video control Description of settings
STILL MODE [> STILL mod]: Select the image to output in
still image mode.
*
AUTO [>> Auto]: Output field 1 or field 2 as the still image,
according to the position the tape is stopped.
FRAME [>> Frame]: Output a full frame as the still image.
FIELD1 [>> Field 1]: Output only field 1 as the still image.
FIELD2 [>> Field 2]: Output only field 2 as the still image.
FIELD1 [>> Field 1]: Output only field 1 as the still image.
FIELD2 [>> Field 2]: Output only field 2 as the still image.
(For DSR-1600A only)
SETUP ADD [> Setup add]: Determine whether or not to add
SETUP ADD [> Setup add]: Determine whether or not to add
black setup to analog video output signals.
*
OFF [>> OFF]: Do not add black setup.
ON (ADD) [>> ON]: Add black setup.
(For DSR-1600A only)
CC(F1) BLANK [>CC1 blank]: Select whether to mute the
CC(F1) BLANK [>CC1 blank]: Select whether to mute the
closed caption signal to be superimposed on the 1st field
of the output video signal.
of the output video signal.
*
OFF [>> OFF]: Do not mute.
ON [>> ON]: Mute.
(For DSR-1600A only)
CC(F2) BLANK [>CC2 blank]: Select whether to mute the
CC(F2) BLANK [>CC2 blank]: Select whether to mute the
closed caption signal to be superimposed on the 2nd field
of the output video signal.
of the output video signal.
*
OFF [>> OFF]: Do not mute.
ON [>> ON]: Mute.
WIDE MODE [>Wide mode]: Determine whether to retain
wide-screen aspect ratio information accompanying video
being played back.
being played back.
*
AUTO [>> Auto]: When video being played back is
accompanied by wide-screen aspect ratio information,
retain the information.
retain the information.
OFF [>> OFF]: Ignore wide-screen aspect ratio information.
ON [>> ON]: Whenever recording or playing back video, retain
ON [>> ON]: Whenever recording or playing back video, retain
wide-screen aspect ratio information.
ESR MODE [>ESR mode]: Select whether to enable the edge
subcarrier reducer (ESR).
*
OFF [>> OFF]: Do not enable.
ON [>> ON]: Enable.
When playing back a composite signal, set this to ON.
When playing back a composite signal, set this to ON.
TAPE PROTECTION [Tape protct]: Settings related to tape
and video head protection
and video head protection
Description of settings