Справочник Пользователя для Sony dvp-ns530

C:\Documents and 
Settings\PC28\Desktop\3080594131 DVP-
NS530GB\SOURCE\01GB12ADV4-CEK.fm

master page=right

DVP-NS530/730P

3-080-594-13(1)

If you connect a component that does not 
conform to the selected audio signal, a loud 
noise (or no sound) will come out from the 
speakers, damaging your ears or speakers.

◆ DOLBY DIGITAL (DVD VIDEO/DVD-RW 
only)
Selects the type of Dolby Digital signal.

◆ MPEG (DVD VIDEO/DVD-RW only)
Selects the type of MPEG audio signal.

◆ DTS (DVD VIDEO only)
Selects whether or not to output DTS signals.

When you use the DIGITAL OUT (COAXIAL or 
OPTICAL) jack to listen to MPEG audio signals 
and set “MPEG” to MPEG in “AUDIO SETUP”, no 
sound will come from your speakers if you select 
one of the TVS mode.

D-PCM

Select this when the player is 
connected to an audio 
component without a built-in 
Dolby Digital decoder. You can 
select whether the signals 
conform to Dolby Surround 
(Pro Logic) or not by making 
adjustments to the 
“DOWNMIX” item in 
“AUDIO SETUP” (page 66).

DOLBY 
DIGITAL

Select this when the player is 
connected to an audio 
component with a built-in 
Dolby Digital decoder.

PCM

Select this when the player is 
connected to an audio 
component without a built-in 
MPEG decoder. If you play 
MPEG audio sound tracks, the 
player outputs stereo signals 
via the DIGITAL OUT 
(OPTICAL or COAXIAL) 
jack.

MPEG

Select this when the player is 
connected to an audio 
component with a built-in 
MPEG decoder.

OFF

Select this when the player is 
connected to an audio 
component without a built-in 
DTS decoder.

ON

Select this when the player is 
connected to an audio 
component with a built-in DTS 
decoder.

01GB01COV.book  Page 67  Wednesday, April 27, 2005  11:37 AM