Справочник Пользователя для Sony GDM-17SE2T

4

Step 3: Turn on the monitor and computer.

Step 4: Switch the input connector according to the

adjustment procedure on page 10.

Step 5: If necessary, adjust the user controls according to

your personal preference.

The installation of your monitor is complete. Enjoy your
monitor.

Notice
To comply with the limits of FCC Class B and IC Class B for
digital device, please attach the supplied video signal cable
for HD15 input or SMF-400 (sold separately) for BNC input.
Furthermore, each cable has ferrite cores on it.

This monitor will sync with any IBM or compatible system
equipped with VGA or greater graphics capability.
Although this monitor will sync to other platforms,
including Macintosh and Power Macintosh system, a cable
adapter is required. Please consult your dealer for advice on
which adapter is suitable for your needs.

Step 1: With the computer switched off, attach the video

signal cable to the monitor (HD15/5 BNC’s) and
attach the other end to the video card.

to
VIDEO IN R/G/B
SYNC IN HD/VD

to video output

to video output

Macintosh Adapter
(supplied)

Apple Computer

IBM or Compatible Computer

IBM or Compatible Computer

Apple Computer

to video output

to video output

Macintosh Adapter
(supplied)

to HD15

Video signal cable
(supplied)

Video signal cable
(not supplied)

Note : Use HD15 (Female)-HD15(Male without No.9 pin)

adapter (not supplied) for current DOS computer
which has no compliance of DDC 2AB and its No.9
pin is disconnected.

Step 2: With the monitor switched off, attach the power

cord to the monitor and the other end to the power
outlet.

 to a wall outlet

Power cord (supplied)