Справочник Пользователя для Sony HTST7

15

US

“PRTECT (protect)” appears on the front panel display.
 Press the  button to turn off the system. After “STBY” 

disappears, disconnect the AC power cord (mains lead), then check 
that nothing is blocking the ventilation holes of the system.

If the system still does not operate properly, reset the system as 
follows:

1

 button to turn on the Bar Speaker.

2

 button while pressing INPUT and VOL  on the 

Bar Speaker. 
“RESET” appears and the system is reset. The menu, SOUND 
MODE, etc., return to the default settings.

Specifications

U.S. models:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(FTC)
Front L + Front R:

 

With 4 ohms loads, both channels driven, from 200 - 20,000 Hz; rated 
25  Watts per channel minimum RMS power, with no more than 1% 
total harmonic distortion from 250 milliwatts to rated output.

POWER OUTPUT (reference)

 

Front L/Front R speaker blocks: 50 Watts (per channel at 4 ohms, 
1 kHz)

 

Center speaker block: 50 Watts (per channel at 4 ohms, 1 kHz)

Canadian models:
POWER OUTPUT (rated)

 

Front L + Front R: 35 W + 35 W 

 

(at 4 ohms, 1 kHz, 1 % THD)

POWER OUTPUT (reference)

 

Front L/Front R speaker blocks: 50 Watts (per channel at 4 ohms, 
1 kHz)

 

Center speaker block: 50 Watts (per channel at 4 ohms, 1 kHz)

Inputs

 

HDMI IN 1/2/3*

 

OPTICAL IN 1(TV)/2

 

ANALOG IN

 

COAXIAL IN

* These 3 jacks are identical. Using any of them makes no difference. 
Output

 

HDMI TV OUT (ARC)

Communication system 

 

BLUETOOTH Specification version 3.0

continued