Справочник Пользователя для Sony HVR-M15P

Chapter 4   Adjusting and Setting Through Menus

48

Chapter 4

Adjusting and Setting Through Menus

 IN/OUT REC COLOR BAR

BARS TYPE

DV BARS

EE/PB SEL

480i LEVEL

Selects whether to display color bars or not. Also, you may select color bars with or without
tone signals (1 kHz full bit –20 dB at 60i, 1 kHz full bit –18 dB at 50i).

OFF :

Does not display color bars and no tone signals.

ON :

Displays color bars without tone signals.

ON [TONE] :

Displays color bars with tone signals.

• Color bars and tone signals are output from   HDV/DV jack and analog output jacks.
• Color bars and tone signals cannot be output when the tape is in playback mode.
• The color bars output to i.LINK/the color bars recorded on tone signals and tapes/the

format of tone signals can be set by [HDV/DV SEL] and [ 

 REC MODE].

– When [HDV/DV SEL] is set to [AUTO], the format of the color bar and tone signals will

be output/recorded according to the video format displayed in “1 Format indicator”
(page 18) of text data display on a monitor.

– When [HDV/DV SEL] is set to [HDV], color bars and tone signals are output/recorded in

HDV format.

– When [HDV/DV SEL] is set to [DV] and [      REC MODE] is set to [DVCAM], color bars

and tone signals will be output/recorded in DVCAM format.

– When [HDV/DV SEL] is set to [DV] and [      REC MODE] is set to [DV SP], color bars

will be output/recorded in DV (SP) format.

• When the unit turns off and on again, [COLOR BAR] is automatically set to [OFF].

Selects the type of color bars.

TYPE 1 :

Outputs TYPE 1 color bars.

TYPE 2 :

Outputs TYPE 2 color bars.

TYPE 3 :

Outputs TYPE 3 color bars.

• When color bars are output in NTSC (60i) mode on the unit, no-setup (0 IRE) signals are

output.

• Even when the unit’s screen aspect ratio displays 4:3, the color bars are generated as

16:9. To output the edge crop (4:3) in HDV format, select [TYPE 1].

• Color bars on the unit are generated in HDV (1080i) resolution. When a resolution other

than HDV (1080i) is output, the color bars are down converted and output. The transition
edges between the color bars are distorted.

• You cannot change the current setting during recording.

Selects the aspect ratio of color bars set in [BARS TYPE] (DVCAM/DV (SP) format only).

16:9  :

Sets the aspect ratio of color bars to 16:9.

4:3 :

Sets the aspect ratio of color bars to 4:3.

You cannot change the current setting during recording.

Sets the stop, fast-forward and rewind modes.

EE :

Outputs EE pictures and EE sounds.

PB:

Mutes the image and sound.

Even [PB] is selected, when you press REC button:

– EE pictures and EE sounds are output.
– When [HDV/DV IN TC] in [TC/UB SET] menu is set to [EXTERNAL], and INPUT

SELECT switch is set to HDV/DV, the time code of the other device connected to 
HDV/DV jack is displayed on Data display screen.

Selects the component output level of luminance and chrominance from either BETACAM
or SMPTE signals when the component output is 480i.

SMPTE :

Sets COMPONENT OUT jacks to SMPTE level.

BETACAM :

Sets COMPONENT OUT jacks to BETACAM level.

For details on COMPONENT OUT jacks specifications,

 see page 75.