Справочник Пользователя для Sony HVR-M15P

Chapter 4   Adjusting and Setting Through Menus

54

Chapter 4

Adjusting and Setting Through Menus

Selects the noise reduction level for the luminance signals when a tape is played.

OFF :

No noise reduction

LOW :

Low noise reduction

HIGH :

High noise reduction

• When you use noise reduction, there may be an afterimage depending on the condition of

the picture.

• Noise reduction is also available with pictures output from   HDV/DV jack. Use caution

when dubbing and editing a picture in HDV/DV.

Selects the noise reduction level for the chrominance signals when a tape is played.

OFF :

No noise reduction

LOW :

Low noise reduction

HIGH :

High noise reduction

• When you use noise reduction, there may be an afterimage depending on the condition of

the picture.

• Noise reduction is also available with pictures output from   HDV/DV jack. Use caution

when dubbing and editing a picture in HDV/DV.

1 Press 

J/j buttons to adjust the number, then press K/k buttons to set the month,

day, hour, and minute.

2 Press EXEC button to execute.

• 12:00 AM stands for midnight and 12:00PM stands for noon when [TIME DISPLAY] is set

to [12H].

• If you do not use the unit for 3 months or more, the built-in rechargeable battery will

become completely discharged, and the settings of the day and the time may be cleared
from the memory. In this case, charge the built-in rechargeable battery and set the clock
again 

(page 67).

Displays the accumulated time counts (by the digital hours meter) in units of 10 hours or 10
counts.

OPERATION : Power on duration
DRUM RUN : Drum rotation duration
TAPE RUN :

Tape run duration

THREADING : Tape unthreading count

Switches the state into which the unit goes when the unit is connected to the AC outlet.

STANDBY :

Makes the unit go into the standby mode.

ON :

Turns the unit on.

PB YNR

PB CNR

CLOCK SET

HOURS
METER

AC ON MODE

 OTHERS