Справочник Пользователя для Sony HVR-M15P

8

Chapter 1

Overview

Chapter 1 Overview

1

2

Selects the destination for the text data to be
superimposed via output jacks.

OFF : Does not superimpose text data to output.
S VIDEO/VIDEO : Superimposes text data to S

VIDEO OUT jack and VIDEO OUT jack.

ALL : Superimposes text data to COMPONENT

OUT jacks, S VIDEO OUT jack, and VIDEO
OUT jack.

3

Press this switch to turn the unit on, and the ON/
STANDBY lamp lights up in green. When you press
this switch again, the unit goes into STANDBY mode
and the lamp lights up in red.

4

Switches the signal input jack from   HDV/DV jack,
S VIDEO jack, and VIDEO jack.

HDV/DV : Inputs a signal from   HDV/DV jack.
S VIDEO : Inputs a signal from S VIDEO jack.
VIDEO : Inputs a signal from VIDEO jack.

• Do not change the setting of this switch while

recording in progress, or it causes noise added to
images and sounds. Also, a part of the tape where the
change of setting applied will not be recorded
properly. Also, the time code may operate
discontinuously.

• If you change the setting of this switch while

recording in progress, the output signal from   HDV/
DV jack may be interrupted. Also, the unit may detect
signals such as a copyright information signal
incorrectly.

• When a signal is input from   HDV/DV jack, the

settings of the menu listed below are unavailable.
– 60i/50i SEL
– AUDIO MODE
– AUDIO LOCK
– AUDIO AGC
– AUDIO REC LV

5

Open this lid to insert or eject a cassette.

1 Tape transport control

section 

(see page 10)

1

 Remote sensor

2

 DISPLAY OUTPUT

switch

3

 ON/STANDBY switch

and lamp

4

 INPUT SELECT switch

5

 Cassette Lid

6

 

J/j/K/k button

7

 EXEC (execute)

button

8

 MENU button

2 Indicator section 

(see page 11)