Справочник Пользователя для Sony ipela snc-rz25p
Ot
her
her
s
Using the Supplied Setup Program
66
Others
This section explains how to use the application
software and commands, including the supplied CD-
ROM.
software and commands, including the supplied CD-
ROM.
Using the Supplied
Setup Program
Setup Program
Explains the functions except the Network tab in the
Setup Program.
Setup Program.
To install the Setup Program, to assign the IP address
and to set the network, see “Assigning the IP address to
the Camera” on page 9 in “Preparations”.
and to set the network, see “Assigning the IP address to
the Camera” on page 9 in “Preparations”.
Starting the Setup Program
Select Program from Start menu of Windows, then
select Program, IP Setup Program and IP Setup
Program in sequence.
The IP Setup Program starts.
Network tab appears. The IP Setup Program detects
cameras connected to the local network and lists them
on the Network tab window.
select Program, IP Setup Program and IP Setup
Program in sequence.
The IP Setup Program starts.
Network tab appears. The IP Setup Program detects
cameras connected to the local network and lists them
on the Network tab window.
Bandwidth Control Tab
The communication bandwidth can be set when the
Video mode of the camera is set to JPEG.
Video mode of the camera is set to JPEG.
Note
When the Video mode of the camera is set to MPEG4,
the bandwidth cannot be changed.
the bandwidth cannot be changed.
1
Click the Bandwidth control tab to display the
bandwidth setting window.
The current bandwidth is displayed in Current
bandwidth.
bandwidth setting window.
The current bandwidth is displayed in Current
bandwidth.
2
Click to select the camera to set the bandwidth from
the list box.
the list box.
3
Click to select the desired bandwidth from the
Setting bandwidth list box.
Setting bandwidth list box.
4
Type the Administrator name and Administrator
password in each box.
password in each box.
5
Click OK.
If “Setting OK” is displayed, the bandwidth setting
is completed.
If “Setting OK” is displayed, the bandwidth setting
is completed.