Справочник Пользователя для Sony KV-27FS16

Other Information

Cannot receive
higher number
channels (UHF)
when using an
antenna

Make sure Cable is set to OFF in the Channel Setup

menu (page 26).

Perform Auto Program to add channels that are not

presently in the memory (page 17).

Cable stations
don’t seem to
work

Make sure Cable is set to ON in the Channel Setup

menu (page 26).

Perform Auto Program to add channels that are not

presently in the memory (page 17).

Remote control
does not
operate

Batteries could be weak. Replace them (page 2).
Move the TV 3-4 feet away from fluorescent lights.

Cannot change
channels with
the remote
control

Make sure you have not inadvertently switched your

TV from the channel 3 or 4 setting if you are using
another device to change channels.

If you are using another device to control channels, be

sure the FUNCTION button for that device has been
pressed. For example, if you’re using your VCR to
control channels, be sure to press the VTR/DVD
FUNCTION buttons (page 15).

The TV needs
to be cleaned

Clean the TV with a soft dry cloth. Never use strong

solvents such as thinner or benzine, which might
damage the finish of the cabinet.

Lost password
for Parental
Control

In the password screen, enter the following master

password: 4357. After using the master password, you
must create a new password; it cannot be used to
unlock currently blocked channels.

Cannot access
other menus
when using the
Basic Menu

If you use the

button to close the Basic menu, only

the Basic menu appears when you press

again. To

have access to the other menus, use the

button to

select Advanced Menu (page 36).

The remote
control won’t
work in PIP
mode

Press the TV FUNCTION button. You may have

inadvertently pressed the VTR/DVD FUNCTION
button, which changes the PIP buttons to VCR mode
(page 15).