Справочник Пользователя для Sony LIB-81

76

Chapter 6  Using the Library Administration Menu

In the “Current Password” box, enter the current password.

If you are setting the password for the first time, enter “LIB-81A”.

In the “New Password” box, enter the new password up to eight 
alphanumeric characters and symbols (! @ # $ % ( ) - { } ~ ").

In the next “Confirm New Password” box, re-enter the same password.

Click “Submit”.

A message that indicates the completion of setting is displayed.

The maximum number of characters that can be set for the password is 
eight. It is not possible to input more than eight characters.

In the Maintenance Menu, the condition of the AIT library can be checked, and 
the firmware of this library can be updated.

Each access to the Maintenance Menu requires the password to be entered. 
Enter “LIB-81A” in the “Password” box, then click “OK”. For information 
about the password, refer to “Password” (page 75).

The following items are in the Maintenance Menu.
• Life  Count

Displays the number of times a specific part has been operated.

• Error Count

Displays the number of times an operation was tried or an error occurred in a 
specific part.

• Sensor

Displays information about the individual sensors, DIP switches and encoder 
values.

• History

Logs can be viewed.

• Diagnostic

You can check whether or not the AIT library is functioning normally.

• Firmware Upload

The firmware of the AIT library can be uploaded.