Справочник Пользователя для Sony LMD-2030W

 

8

Location and Function of Parts and Controls

a

You can check the status of the monitor by the color of the tally 
lamp.
The tally lamp lights in red, green or amber depending on the 
setting of the REMOTE PARALLEL menu.

b

Press to turn on the power. The indicator turns on. Press again to 
turn off the power.

c

Lights when the key inhibit function works.

d

Press the + button to increase the volume or the – button to 
decrease it.

e

Displays or sets the on-screen menu.

M/m/</, (arrow) buttons
Select the menu or make various adjustments.

MENU button
Press to display the on-screen menu.
Press again to clear the menu.

RESET button
Resets the value of an item back to the previous value.
This button functions when the menu item is adjusted 
(displayed) on the screen.

ENTER button
Press to confirm a selected item on the menu.

f

Sets the aspect ratio of the picture, 4:3 or 16:9.

g

You can change the scan size of the picture.
Press to change the scan size among over (5 % over scan), under 
(–3 % under scan) and full screen set on the SCAN menu 
(page 18).

h

Press to eliminate the red and green signals. Only blue signal is 
displayed as a monochrome picture on the screen. This mode is 
convenient for chroma and phase adjustments and monitoring of 
VCR noise.

i

Press to operate the unit on an external sync signal through the 
EXT SYNC IN connector.
The EXT SYNC button works when the component/RGB signals 
are input.

j

Press to monitor the signal through the OPTION IN connector.

k

Press to monitor the signal through the RGB/COMPONENT 
input connector.

l

Press to monitor the signal through the HDMI IN connector.

LINE A

HDMI

SDI

SCAN

ASPECT

RESET

MENU

VOLUME

POWER

KEY

INHIBIT

ENTER

RGB/

COMPONENT

EXT

SYNC

BLUE
ONLY

qd

qf

1

qs qa 0 9 8 7 6

5

4 3 2