Справочник Пользователя для Sony MDS-JS333ES

Playing a specific track/Locating a particular point in a track

Pla

ing

M
D

You can extend the playing time during Music Scan

While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.

Turn AMS (or press

./> repeatedly) until “M.Scan”

appears, then press AMS or YES.

Turn AMS (or press

./> repeatedly) to select the

playing time within a range of six to twenty seconds (in
one second steps), then press AMS or YES.

Press MENU/NO.

Press the number button(s) to enter the track number
of the track you want to play.

To enter a track number over 25

Press >25.

Enter the corresponding digits.

To enter 0, press 10 instead.

Examples:

•

To play track number 30, press >25, then 3 and 10.

•

To play track number 108, press >25 twice, then 1,
10, and 8.

If you enter a track number while the deck is paused

The deck will still be paused at the beginning of the track.

Locating a particular point
in a track

You can locate a particular point in a track during play or
play pause.

During play, press down

until you reach the

point you want.

You will hear intermittent playing as the disc goes forward
or in reverse. When you reach the point you want, release
the button.

Notes

•

If the MD reaches the end while you’re pressing

M, the deck

stops.

•

Tracks that are only a few seconds long may be too short for
monitoring. For such tracks, play the MD at normal speed.

During play pause, press down

until you reach

the point you want.

When you reach the point you want, release the button. To
start playing, press

N or X. No sound is output during

this time.

When “– Over –” appears in the display

The MD has reached the end while you’re pressing

M. Turn

AMS counterclockwise (or press

.) or press m to go back.

Playing a track by entering the track
number

Locating a point while monitoring the
sound

Locating a point by observing the time
indication