Справочник Пользователя для Sony MDX-CA790X

Скачать
Страница из 136
17
Receiving traffic 
announcements
— TA (Traffic Announcement)/TP (Traffic 
Programme)
By activating TA and TP, you can automatically 
tune in an FM station broadcasting traffic 
announcements. These settings function 
regardless of the current FM programme/source, 
MD/CD; the unit switches back to the original 
source when the bulletin is over.
Press 
(TA)
 repeatedly until “TA-ON” 
appears.
The unit starts searching for traffic 
information stations. 
“TP” indicates reception of such stations, and 
“TA” flashes during an actual traffic 
announcement. The unit will continue 
searching for stations available with TP if 
“NO TP” is indicated.
To cancel all traffic announcements, select “TA-
OFF.”
Tip
You can also cancel the current announcement by 
pressing 
(SOURCE)
 or 
(MODE)
.
Presetting the volume of traffic 
announcements
You can preset the volume level of the traffic 
announcements so you won’t miss hearing them.
1
Press the volume +/– button to adjust 
the desired volume level.
2
Press 
(TA)
 for 2 seconds.
“TA” appears and the setting is stored.
Receiving emergency announcements
If either AF or TA is on, the unit will switch to 
emergency announcements, if one comes in 
while listening to an FM station, or MD/CD.
Presetting RDS stations with 
AF and TA setting
When you preset RDS stations, the unit stores 
each station’s AF/TA setting (on/off) as well as 
its frequency. You can select a different setting 
(for AF, TA, or both) for individual preset 
stations, or the same setting for all preset 
stations. If you preset stations with “AF-ON” the 
unit automatically stores stations with the 
strongest radio signal.
Presetting the same setting for all 
preset stations
1
Select an FM band (page 14).
2
Press 
(AF)
 and/or 
(TA)
 to select “AF-
ON” and/or “TA-ON.”
Note that selecting “AF-OFF” and “TA-OFF” 
applies to non-RDS stations as well as RDS 
stations.
3
Press 
(SENS)
 (BTM) until “BTM” 
flashes.
Presetting different settings for each 
preset station
1
Select an FM band, and tune in the 
desired station (page 14)
.
2
Press 
(AF)
 and/or 
(TA)
 to select “AF-
ON” and/or “TA-ON.”
3
Press the desired number button (
(1)
 
to 
(6)
) until “MEM” appears.
Repeat from step 1 to preset other stations.
Note
If you want to change the AF/TA setting while you are 
playing an MD, press 
(AF)
 or 
(TA)
.
To
Press
Cancel current 
announcement
(TA)