Справочник Пользователя для Sony MHC-MG310AV
Getting Started
11
Adjusting the speaker volume
of each speaker
of each speaker
— Test tone
1
Press PRO LOGIC.
“DOLBY PL ON” appears.
2
Press TEST TONE on the remote.
The test tone is heard from the speakers in
the following order.
the following order.
Front (left) t Center t Front (right) t
Rear t Front (left) t …
Rear t Front (left) t …
3
From your listening position, press
CENTER (+/–) and REAR (+/–) on the
remote to adjust the volume until the
each volume level becomes the same.
CENTER (+/–) and REAR (+/–) on the
remote to adjust the volume until the
each volume level becomes the same.
4
Press TEST TONE when you finish
adjusting.
adjusting.
The test tone turns off.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
Surround sound.
Setting the time
1
Turn on the system.
2
Press TIMER SET.
When you set the clock for the first time, go
to step 5.
to step 5.
3
Press –
.
or
>
+ repeatedly to
select “CLOCK SET”.
4
Press ENTER.
5
Press –
.
or
>
+ repeatedly to set
the hour.
6
Press ENTER.
7
Press –
.
or
>
+ repeatedly to set
the minute.
8
Press ENTER.
Tip
If you made a mistake or want to change the time,
start over from step 1.
start over from step 1.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
the power cord or if a power failure occurs.