Справочник Пользователя для Sony MSW-M2100
Chapter 8
Setup Menus
8-18
Chapter 8 Setup Menus
8-4 Items in the Extended Setup Menu
Menu items in the range 800 to 899, relating to audio control (Continued)
Item number
Item name
Settings
827
AES OUT SEL
Select the audio signals to assign to AES/EBU audio output channels.
APPI-DSP software Version 0.90 or higher is required to display this menu item.
APPI-DSP software Version 0.90 or higher is required to display this menu item.
Note
Check to be sure that the selected tracks are being output from the AES/EBU
OUTPUT connectors.
OUTPUT connectors.
Sub-item
1
CH1/CH2
tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
2
CH3/CH4
tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
828
SDI OUT SEL
Select the audio signals to assign to SDI audio output channels.
The HD-SDI OUTPUT connector of the UP-CONTROL option also follows this
menu item.
The HD-SDI OUTPUT connector of the UP-CONTROL option also follows this
menu item.
Note
Check to be sure that the selected tracks are being output from the SDI OUTPUT
connectors.
connectors.
Sub-item
1
CH1/CH2
tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
2
CH3/CH4
tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
829
SDTI OUT SEL
Select the audio signals to assign to SDTI audio output channels.
Settings for SDTI CH5 to CH8 SEL are impossible for hardware reasons. DIF-
FPGA change is required.
This menu item applies when APR Board-14 or higher is installed.
Settings for SDTI CH5 to CH8 SEL are impossible for hardware reasons. DIF-
FPGA change is required.
This menu item applies when APR Board-14 or higher is installed.
Note
Check to be sure that the selected tracks are being output from the SDTI
OUTPUT connectors.
OUTPUT connectors.
Sub-item
1
CH1/CH2
tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
2
CH3/CH4
tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.