Справочник Пользователя для Sony pcv-rx203
S
o
n
y
V
A
IO
D
e
s
k
to
p
U
s
e
r
G
u
id
e
Upgrading your VAIO computer
76
✍
Do not place the memory module in places subject to:
- Heat sources such as radiators or air ducts,
- Direct sunlight,
- Excessive dust,
- Mechanical vibration or shock,
- Strong magnets or speakers that are not magnetically shielded,
- Ambient temperature of more than +35°C or less than +5°C,
- High humidity.
- Heat sources such as radiators or air ducts,
- Direct sunlight,
- Excessive dust,
- Mechanical vibration or shock,
- Strong magnets or speakers that are not magnetically shielded,
- Ambient temperature of more than +35°C or less than +5°C,
- High humidity.
Installing a new memory module
If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your
dealer.
dealer.
To add or change a memory module, proceed as follows:
1
Shut down the computer, unplug it, and remove any peripheral devices. Wait for the computer to cool
down.
down.
2
Open the unit (see Opening the side cover
).
3
Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to
access the DIMM slots.
You must remove the power supply before installing the memory modules. Remove the power supply by
following these steps:
access the DIMM slots.
You must remove the power supply before installing the memory modules. Remove the power supply by
following these steps:
❑
Remove the screw that secures the power supply to the rear of the chassis.
❑
Pull the tab that latches the power supply to the chassis.
❑
Slide the power supply up until the power supply clears the chassis.
❑
Rotate the power supply to an upside down position and rest it on top of the chassis where the hard
drive is located.
drive is located.
4
Handle the memory only by the edges, and remove it from its anti-static package.