Справочник Пользователя для Sony power had ex dvcam dsr-400l

129

Troubleshooting

  C
hap

te

r 7

  

Ap
pe
nd
ix

The equipment connected to the 
camcorder via an i.LINK connection 
does not react as expected, for 
example, the video image does not 
appear on its screen.

It sometimes takes time for the connected 
equipment to recognize the operation.

Wait for about 15 seconds. If the connected 
equipment still does not react, do the 
following.
• Check the i.LINK connection, for example, 

by re-inserting the i.LINK cable.

• Turn the power off, and connect the cable 

again.

• Change the i.LINK cable.

The camera is not recognized by 
the PC that is connected to the 
i.LINK connector.

There is a problem with the software, for 
example, it does not support the DVCAM 
format, etc.

Install software that supports the DVCAM 
format.

The camera is not controlled by the 
PC that is connected to the i.LINK 
connector.

There is a problem with the software, for 
example, it does not support the DVCAM 
format, etc.

Install software that supports the DVCAM 
format. Or set the REC TRIGGER switch to 
INT.