Справочник Пользователя для Sony SDM-HS74P
5
(US)
US
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will light up in green. If the
function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will light up in green. If the
function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
If the picture disappears from the screen and the
1
(power) indicator is green
1
Turn off the
1
(power) switch and disconnect the
video signal cables from the monitor.
2
Turn the monitor on by pressing the
1
(power)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video signal cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
is working properly. Reconnect the video signal cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Displaying this monitor’s
information
information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
Although the safety standard registered model name of this unit is
SDM-HS74/ and SDM-HS74P/, the name of SDM-HS74 and
SDM-HS74P is used on sale and in this instruction manual.
SDM-HS74/ and SDM-HS74P/, the name of SDM-HS74 and
SDM-HS74P is used on sale and in this instruction manual.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-HS74 or SDM-HS74P
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
the following information:
• Model name: SDM-HS74 or SDM-HS74P
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
Specifications
SDM-HS74/SDM-HS74P
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size: 17.0 inch
Picture size: 17.0 inch
Input signal format
RGB operating frequency*
Horizontal: 28 – 80 kHz (analog RGB)
Horizontal: 28 – 80 kHz (analog RGB)
28 – 64 kHz (digital RGB)
Vertical:
48 – 75 Hz (analog RGB)
60 Hz (digital RGB)
60 Hz (digital RGB)
Resolution
Horizontal: Max.1280
dots
Vertical: Max.1024
lines
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75
Ω
, positive
SYNC signal:
TTL level, 2.2 k
Ω
,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75
Ω
, negative
(Sync on green)
Digital RGB (DVI) signal: TMDS (Single link)
Power requirements
100 – 240 V, 50 – 60 Hz, Max. 1.0 A
Power consumption
Max. 45 W
Operating temperature
5 – 35 °C
Dimensions (width/height/depth)
Display (upright):
Approx. 441
×
404
×
216 mm
(17
3
/
8
×
16
×
8
5
/
8
inches)
Mass
Approx. 5.7 kg (12 lb. 9 oz.)
Plug & Play
DDC2B
Accessories
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
MENU
INFORMATION
MODEL : SDM-HS74
SER . NO : 1234567
MANUFACTURED : 2004-52
SER . NO : 1234567
MANUFACTURED : 2004-52
Example
Model name
Serial number
Week and year
of manufacture
of manufacture