Справочник Пользователя для Sony SDM-S204E

Press the

buttons to select “SMOOTHING” and

press the OK button.

The SMOOTHING menu appears on the screen.

Press the

buttons to select the desired mode.

The smoothing effect becomes stronger in the order of
TEXT

tSTANDARDtGRAPHICS.

•

TEXT

: To make the characters appear clear. (This mode is

suited for text-based applications.)

•

STANDARD (The default setting)

: Standard smoothing

effect.

•

GRAPHICS

: To make the pictures appear clean. (This

mode is suited for CD-ROM software such as
photo images or illustrations.)

Notes

• When you set the

(ZOOM) menu to REAL, the SMOOTHING

menu is not available.

• 1600

× 1200 resolution signals are shown only in REAL mode and

SMOOTHING is not possible.

SCREEN menu (analog RGB

signal only)

You can adjust the following items using the SCREEN menu.
• AUTO
• PHASE
• PITCH
• H CENTER
• V CENTER

Automatic picture quality adjustment
function

When the monitor receives an input signal, it automatically
adjusts the picture’s position and sharpness (phase/pitch), and
ensures that a clear picture appears on the screen (page 18).

Note

While the automatic picture quality adjustment function is activated, only
the 1 (power) switch will operate.

If the automatic picture quality adjustment function of this
monitor seems not to completely adjust the picture

You can make further automatic adjustment of the picture quality for the
current input signal (See “AUTO” below).

If you still need to make further adjustments to the picture
quality

You can manually adjust the picture’s sharpness (phase/pitch) and
position (horizontal/vertical position).

These adjustments are stored in memory and automatically
recalled when the monitor receives a previously input and
registered input signal.

Make further automatic adjustments to the
picture quality for the current input signal
(AUTO)

Press the MENU button.

The main menu appears on the screen.

Press the

buttons to select

(SCREEN) and

press the OK button.

The SCREEN menu appears on the screen.

Press the

buttons to select “AUTO” and press

the OK button.

Make the appropriate adjustments of the screen’s phase, pitch
and horizontal/vertical position for the current input signal
and store them.

Adjust the picture’s sharpness manually
(Phase/Pitch)

You can adjust the picture’s sharpness as follows. This
adjustment is effective when the computer is connected to the
monitor’s HD15 input connector (analog RGB).

Set the resolution to 1600

1200 on the computer.

Load the CD-ROM.

Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows

Click [Utility]

t [Windows]/[Win Utility.exe].

For Macintosh

Click [Utility]

t [Mac]/[Mac Utility].

Press the MENU button.

The main menu appears on the screen.

Press the

buttons to select

(SCREEN) and

press the OK button.

The SCREEN menu appears on the screen.

Press the

buttons to select “PHASE” and press

the OK button.

The “PHASE” adjustment menu appears on the screen.

Press the

buttons until the horizontal stripes

are at a minimum.

Adjust so that the horizontal stripes are at a minimum.

Press the OK button.

The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.

Note

When receiving digital RGB signals from the DVI-D input connector,
adjustment is unnecessary.

1 6 0 0

1 2 0 0

6 0 H z

E X I T

AU TO
    P H A S E
    P     T C H
    H     C E N T E R
    V     C E N T E R

S C R E E N