Справочник Пользователя для Sony SLV-N80
75
Recording TV programs using the VCR Plus+ or VCR Plus+ GOLD system
B
a
sic
O
p
O
p
er
at
at
ions
To use the VCR after setting the timer
To use the VCR before timer recording begins, just press ?/1. The
indicator
disappears from the display window and the VCR switches on. Remember to press
?/1 to reset the VCR to the timer recording standby mode after using the VCR.
?/1 to reset the VCR to the timer recording standby mode after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 63).
• Display tape information on the TV screen (page 66).
• Check the timer settings (page 82).
• Watch another TV program (page 67).
• Display tape information on the TV screen (page 66).
• Check the timer settings (page 82).
• Watch another TV program (page 67).
To lock the VCR after setting the timer (Child Lock)
When the VCR is turned on, hold down ?/1 POWER on the VCR until the -
indicator appears in the display window. The VCR turns off and the - indicator
remains lit. The VCR will not work except for timer recordings.
indicator appears in the display window. The VCR turns off and the - indicator
remains lit. The VCR will not work except for timer recordings.
To unlock the VCR, hold down ?/1 POWER on the VCR until the - indicator
disappears from the display window. The VCR is unlocked and turns on.
disappears from the display window. The VCR is unlocked and turns on.
To stop timer recording while the VCR is locked, press x STOP. The recording
stops and the VCR is unlocked.
stops and the VCR is unlocked.
Tips
• To check, change or cancel the program setting, see “Checking/changing/canceling timer
• When you are recording a program in the SP mode and the remaining tape becomes shorter
than the recording time, the tape speed is automatically changed to the EP mode. Note that
some noise will appear on the picture when the tape speed is changed. If you want to keep
the tape speed, set AUTO TAPE SPEED to OFF in the ADVANCED OPTIONS menu (page
97).
some noise will appear on the picture when the tape speed is changed. If you want to keep
the tape speed, set AUTO TAPE SPEED to OFF in the ADVANCED OPTIONS menu (page
97).
Notes
• If the VCR does not accept the PlusCode number, this means that:
– The PlusCode number is incorrect.
– ONCE, DAILY, or WEEKLY was selected incorrectly. You cannot select DAILY or
– ONCE, DAILY, or WEEKLY was selected incorrectly. You cannot select DAILY or
WEEKLY for a program that airs more than seven days ahead.
• The VCR will be unlocked when:
– You stop timer recording by pressing x STOP.
– You insert a tape.
– The AC power cord is disconnected or power supply stops.
– You insert a tape.
– The AC power cord is disconnected or power supply stops.
• The station ID appears on the TV screen only when you complete Smart Channel Mapping
and the VCR receives the program information signal (SLV-N80 only) (see page 52).