Справочник Пользователя для Sony SLV-SE510K

Editing with another VCR

Ad
d

itiona

l O
p

tions

Notes

• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other

VCR, select the input correctly to prevent a humming noise.

• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-

2106HG cable instead and connect the cable to the line out jacks of the other VCR.

• When you connect another VCR to the DECODER/LINE-2 IN connector, set

DECODER/LINE2 to LINE2 in the OPTIONS-2 menu.

Operation (when recording on this VCR)

Before you start editing

• Turn on your TV and set it to the

video channel.

• Press INPUT SELECT to display

the connected line in the display
window.

• Press SP/LP to select the tape

speed, SP or LP.

To stop editing

Press the

x (stop) buttons on both VCRs.

Tip

• To cut out unwanted scenes while editing, press

X (pause) on this VCR when an

unwanted scene begins. When it ends, press

X (pause) again to resume recording.

Note

• If you start editing following the procedure above, the VCR won’t start recording

with the OPC function. To record a tape with the OPC function, press

z REC

again during recording pause in step 3 so the VCR analyses the tape. Then, press

X (pause) after the OPC indicator stops flashing to start recording. If you press X
(pause) before the OPC indicator stops flashing, the OPC function is cancelled.

Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.

Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press

X (pause).

Press

z REC on this VCR to set it to recording pause.

To start editing, press the

X (pause) buttons on both VCRs at the same

time.

REC