Справочник Пользователя для Sony SLV-SP100R

Additional Operations

23

Set the timer on the equipment to the time of the programme you want
to record, then turn the equipment off.

Insert a tape with its safety tab in place. Make sure the tape is longer
than the total recording time.

Hold SYNCHRO REC down for more than two seconds.

The SYNCHRO REC button lights up and the VCR stands by for
recording.

The VCR automatically turns on and starts recording when it receives
audio/video signals from the connected equipment.

Press SYNCHRO REC so that the button’s light turns off.

Press x STOP while recording.

The VCR automatically stops recording when the tape reaches the end or
when the other equipment stops transmitting the audio/video signals.

Notes
• Some TVs or other equipment automatically turn off in a certain time if you do not

operate it after it turns on with the timer. In this case the Synchronised Recording
also stops automatically.

• The Synchronised Recording starts and stops according to the signals from the

connected equipment. Refer also to the instruction manual of the connected
equipment for its timer function.

• Some equipment keeps transmitting signals even though the power is off. In this

case, the Synchronised Recording feature does not work because the VCR will not
be able to know when to start recording.

• You can record tapes only in SP mode.