Справочник Пользователя для Sony SLV-SF99EN
Additional Operations
75
Editing with another VCR or stereo system
Operation
(when recording on this VCR)
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video
channel. Press INPUT SELECT to display
“L2” (or “L3” or “L4”) in the display window.
“L2” (or “L3” or “L4”) in the display window.
• Press SP/LP to select the tape speed, SP or
LP.
• On this VCR, set EDIT to ON in the
VIDEO OPTIONS menu to display
“EDIT” in the display window. If the other
VCR has a similar feature, activate this one
as well.
“EDIT” in the display window. If the other
VCR has a similar feature, activate this one
as well.
To stop editing
Press the
x STOP buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press
X PAUSE on this VCR when an unwanted
scene begins. When it ends, press
X PAUSE again to resume recording.
Note
• If you start editing following the procedure above, the VCR won’t start recording with the
OPC function. To record a tape with the OPC function, press
z REC again during recording
pause in step 3 so the VCR analyses the tape. Then, when you start editing in step 4, press
X
PAUSE after the OPC indicator stops flashing. If you press
X PAUSE before the OPC
indicator stops flashing, the OPC function is cancelled.
g
z
REC
X
PAUSE
S E
R
L
R
E C T :
S E T
:
V I D E O
E D I T
CO LO Y
T E
S
U R
M
S
P T I ON S
O
S H AR
S
P N E S
O
N
N R
O
O P C
O N
OK
MA L
A
T
U
O
NORMA L
1
Insert a source tape with its safety tab removed into the other (playback) VCR.
Search for the point to start playback and set it to playback pause.
Search for the point to start playback and set it to playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR. Search for the
point to start recording and press
point to start recording and press
X PAUSE.
3
Press
z REC on this VCR to set it to recording pause.
4
To start editing, press the
X PAUSE buttons on both VCRs at the same time.