Справочник Пользователя для Sony SLV-SE810G

85

Troubleshooting

Master Page : Right

filename[010addi.fm] model name1[SLV-SE610G] model name2[SLV-SE710G]

 model name3[SLV-SE710I]  model name6[SLV-SE810G]

 [3-065-677-11 (1)]

The VIDEO Plus+ menu 
or the TIMER menu does 
not appear.

• Check that TIMER OPTIONS in the OPTIONS-2 menu is 

set correctly (see page 77).

The VPS/PDC function 
does not operate 
properly.

• Check that the clock and the date are set correctly.
• Check that the VPS/PDC time you set is the correct one 

(there might be a mistake in the TV programme guide).  If 
the broadcast you wanted to record did not send the good 
VPS/PDC information, the VCR will not start recording.

• If the reception is poor, the VPS/PDC signal might be 

altered and the VCR might not start recording.

The SYNCHRO REC 
button turns off while 
recording or does not go 
back to recording 
standby mode.

• The tape has reached its end.  Insert a new tape and press 

SYNCHRO REC again.

The Synchronized 
Recording function does 
not work.

• The connected equipment was not turned off.

Turn off the connected equipment and press SYNCHRO 
REC again.

• There was a power failure.  Press SYNCHRO REC again.

The programme recorded 
with the Synchronized 
Recording function is 
incomplete.

• If the settings for timer recordings and Synchronized 

Recording overlap, the programme that starts first has 
priority and the second programme starts recording only 
after the first programme has finished.

• There was a power failure.  Press SYNCHRO REC again.

A tape cannot be 
inserted.

• Check that a tape isn’t already in the tape 

compartment.

The remote 
commander does not 
function.

• Make sure you are pointing the remote commander at 

the remote sensor on the VCR.

• Replace all the batteries in the remote commander 

with new ones if they are weak.

• Make sure the 

[TV] / [VIDEO] remote control switch 

is set correctly.

The SMARTLINK 
function does not 
work.

• Check that your TV complies with SMARTLINK, 

MEGALOGIC, EASYLINK, Q-Link, EURO VIEW 
LINK, or T-V LINK.

• Make sure you use the Scart cable to connect the 

VCR and your TV.

• Make sure the Scart cable is connected securely.

The tracking meter 
does not appear on the 
TV screen.

• The recording condition of the tape is very poor and 

tracking cannot be adjusted.

• The tracking meter does not appear when playing 

back an NTSC-recorded tape.