Справочник Пользователя для Sony SPP-N1025

Additional Information

55

You hear interference during
conversation.

Your conversation is muted and
“NO CONNECT” appear on the
display.

You hear a beep every three
seconds and E and “BATTERY
LOW” appears on the display.

You cannot use call waiting
service.

You cannot store a speed
dialing number.

You cannot make a speed
dialing call.

Speed dialing is incorrect.

You hear five short error beeps
and cannot store a number in
the Phone Directory.

Phone Directory dialing is
incorrect.

The handset does not ring
when calling from the base
phone.

• Move the handset closer to the base phone.
• Place the base phone away from noise sources

(page 6).

• Press (CHANNEL) for a channel that gives better

reception.

• This is the out-of-range alarm.  Move the handset

closer to the base phone within one minute.

• The battery may be weak. Charge the battery for more

than 12 hours (page 9).

• Make sure you have subscribed to call waiting service.
• The setting of the FLASH TYPE may have been

changed. Check the setting and correct it if changed
by following the steps below.
1 Press  (PGM).
2 Display “FLASH TYPE:” using the Jog lever.
3 If the value of the FLASH TYPE is not 3, press

(SELECT)

, then display “3” using the Jog lever.

4 Press  (PGM).

• Make sure you follow the procedure in storing the

number correctly (page 25).

• When the handset is in use, you cannot store a speed

dialing number on the base phone.

• When you hear four short beeps, move the handset

closer to the base phone, or make sure you set up the
base phone correctly.

• You pressed the number button to which no phone

number has been stored.

• Store a correct number (page 25).

• Make sure you follow the procedure in storing the

number correctly (page 27).

• Make sure the number (including the tone and pause

digits) does not exceed 16 digits.

• Store a correct number (page 27).

• The handset may be engaged in conversation.
• The battery may be weak. Charge the battery for more

than 12 hours (page 9).

• Move the handset closer to the base phone.
• Place the base phone away from noise sources

(page 6).