Справочник Пользователя для Sony STRDG510

 

 

 

 

 

 

 

• Check that the speakers and components 

are connected securely.

• Check that the connecting cords are away 

from a transformer or motor, and at least 3 
m (10 feet) away from a TV set or 
fluorescent light.

• Move your audio components away from 

the TV.

• The plugs and jacks are dirty. Wipe them 

with a cloth slightly moistened with 
alcohol.

• Select a CINEMA STUDIO EX mode 

• Adjust the speaker level (page 31).
• Make sure the center/surround speakers 

are set to either “SMALL” or “LARGE” 
(page 38).

• Check that the sub woofer is connected 

correctly and securely.

• Make sure you have turned on your sub 

woofer.

• Make sure the sub woofer is set to “YES” 

• There is no sound from the sub woofer 

depending on the sound field.

• Make sure that you have connected the 

digital audio jacks on the playback 
component to the receiver. Then, turn off 
or mute the TV’s volume.

• Make sure the sound field function is on 

(press MOVIE, or MUSIC).

• Sound fields do not function for signals 

with a sampling frequency of more than 

 

48 kHz.

• Check that the DVD, etc. you are playing 

is recorded in Dolby Digital or DTS 
format.

• When connecting the DVD player, etc., to 

the digital input jacks of this receiver, 
check the audio setting (the settings for the 
audio output) of the connected component.

• Select the appropriate input using the input 

buttons.

• Set your TV to the appropriate input mode.
• Move your audio components away from 

the TV.

• Check the HDMI connection.
• Depending on the playback component, 

you may need to set up the component. 
Refer to the operating instructions 
supplied with each component.

• Check that the components are connected 

correctly.

• Select the source component using the 

input buttons.