Справочник Пользователя для Sony SVO-1330

24 

(US)

If you connect the CLOCK ADJ IN/OUT terminals of
the VCRs, you can adjust the clock of all the connected
VCRs simultaneously in the following cases:

– when the clock of VCR 1 comes to the set time
– when you input a signal from an external switch

Connect the external switch between the CLOCK ADJ
IN terminal and the GND terminal of VCR 1.

to CLOCK ADJ OUT

to CLOCK ADJ IN

to CLOCK ADJ OUT

to CLOCK ADJ IN

Press MENU and select 3.SET UP/USED TIME
using SHIFT 

v, then press SHIFT b.

The SET UP menu appears on the screen.

Press SHIFT 

v to flash the setting of “CLOCK

ADJ.”

Set the time you want to adjust the clock using
DATA +/–.

                   [ SET UP ]

               [ USED TIME ]
       HEAD                  00005H

END ALARM
TAPE END

CLOCK ADJ
BUZZER
THREAD CHECK 

TAPE 

APC

T-120
END
REW
ON
0 1 : 0 0
ON
ON

When the clock of VCR 1 comes to the time set
on “CLOCK ADJ,” the signal will be output
from the CLOCK ADJ OUT terminal to adjust
the clocks of all the connected VCRs.

When you turn on the switch and its signal is
received at the CLOCK ADJ IN terminal of
VCR 1, the clocks of all the connected VCRs
will be adjusted to the time set on “CLOCK
ADJ.”

Press MENU twice to return to the normal display.

VCR 1

VCR 2

VCR 3