Справочник Пользователя для Sony SVX-800

No power.

No operation starts when
operation buttons are pressed.

There is not playback picture, or the
playback picture is noisy or contains
streaks.

During special effects playback, the
picture may contain some vertical
jitter when using a TV which has an
automatic vertical hold control.

If the top of your playback picture
waves back and forth excessively.

Video cassette can't be inserted.

Video cassette can't be removed.

Check the following points once again if you are having some trouble with your VCR.

• Check that the car battery cord is completely connected to the DC 12 V

input connector and the cigarette lighter socket.

• Check that the POWER switch is set to on.

• Check the DEW indicator (p.7.)  If it is displayed, the unit will not operate.

• Adjust the TRACKING control slowly in either direction (p.6.)
• Video heads are clogged (p.7.)

• Set the TV's vertical hold control to “MANUAL” and then adjust it.

• Because the VCR playback signal is not as stable as an off-the-air TV

signal, the top of your TV screen may be bent or unstable during
playback.  To  solve this problem, slowly turn the horizontal hold control
on your TV to correct the wavy picture.  If your TV does not have a
horizontal hold control or adjusting the control does not help, please
contact your local TV service center.

• Insert the cassette with the window side up and the record tab facing you.

• Check that the car battery cord is completely connected to the cigarette

lighter socket.