для Sony VPL-CX70
16
Projecting
• The projection size that can be
adjusted with the automatic focus
adjustment is from 40-inch up to 150-
inch. However, it may not be perfectly
adjusted depending on the brightness
of the room, the state of the screen, or
the use of the Side Shot. In this case,
adjust it manually in step 8 on
page 17.
adjustment is from 40-inch up to 150-
inch. However, it may not be perfectly
adjusted depending on the brightness
of the room, the state of the screen, or
the use of the Side Shot. In this case,
adjust it manually in step 8 on
page 17.
• When the projector is turned on, the
Startup screen is projected (VPL-
CX76 only).
CX76 only).
For details, see the attached “Operating
Instructions for “Memory Stick”” stored
on the CD-ROM.
Instructions for “Memory Stick”” stored
on the CD-ROM.
3
Turn on the equipment connected to
the projector.
the projector.
4
Press the INPUT key to select the
input source.
input source.
Each time you press the key, the input
signal switches as follows:
signal switches as follows:
Smart APA (Auto Pixel Alignment)
adjusts the picture of the connected
equipment so that it is projected clearly.
adjusts the picture of the connected
equipment so that it is projected clearly.
• For Input-B, input from the “Air Shot” or
“Memory Stick” can be switched by
selecting with the Input-B Select menu,
or pressing the
selecting with the Input-B Select menu,
or pressing the
key or the
AIR SHOT key on the Remote
Commander. The Air Shot Home or the
Memory Stick Home is displayed on the
screen (VPL-CX76 only).
Commander. The Air Shot Home or the
Memory Stick Home is displayed on the
screen (VPL-CX76 only).
• If “Auto Input Search” is set to “On,” the
projector searches for the signals from
the connected equipment and displays
the input channel where the input signals
are found.
the connected equipment and displays
the input channel where the input signals
are found.
For details, see “Auto Input Search”
on page 29.
on page 29.
• The Smart APA feature is effective for
the input signal from a computer only.
5
Switch the equipment connected to
output to the projector.
output to the projector.
Depending on the type of your
computer, for example a notebook, or an
all-in-one LCD type, you may have to
switch the computer to output to the
projector by pressing certain keys (e.g.,
computer, for example a notebook, or an
all-in-one LCD type, you may have to
switch the computer to output to the
projector by pressing certain keys (e.g.,
, etc.), or by changing
your computer’s settings.
The key used for switching the computer to
output to the projector varies depending on
the type of computer.
output to the projector varies depending on
the type of computer.
6
Adjust the upper or lower position of
the picture.
the picture.
To adjust using the Remote
Commander
Press the TILT/KEYSTONE key on the
Remote Commander to display the Tilt
Commander
Press the TILT/KEYSTONE key on the
Remote Commander to display the Tilt
Notes
To input from
Press INPUT
to display
to display
Computer connected to
the INPUT A connector
the INPUT A connector
Input-A
Air Shot/“Memory
Stick” (when you use the
Air Shot/“Memory
Stick”) (VPL-CX76
only)
Stick” (when you use the
Air Shot/“Memory
Stick”) (VPL-CX76
only)
Input-B
Video equipment
connected to the VIDEO
input connector
connected to the VIDEO
input connector
Video
Video equipment
connected to the
S VIDEO input
connector
connected to the
S VIDEO input
connector
S-Video
Input-A
t Input-B t Video t S-Video
(VPL-CX76
only)
only)
Notes
Note
VGA
LCD
/
/
,
F7
Fx
Fn
or
and