Справочник Пользователя для Sony wega klv s23a10
17
Conn
ectin
g the
TV
Connecting the TV
To display clear crisp pictures, first you must connect your TV correctly and
also need to choose the correct display format (see “Changing the wide
screen mode” on page 38). It is strongly recommended to connect the
antenna using the supplied 75-ohm coaxial cable to receive optimum picture
quality signal. A 300-ohm twin lead cable can be easily affected by radio
noise and the like, resulting in signal deterioration. If you use a 300-ohm
twin lead cable, keep it as far away as possible from the TV.
also need to choose the correct display format (see “Changing the wide
screen mode” on page 38). It is strongly recommended to connect the
antenna using the supplied 75-ohm coaxial cable to receive optimum picture
quality signal. A 300-ohm twin lead cable can be easily affected by radio
noise and the like, resulting in signal deterioration. If you use a 300-ohm
twin lead cable, keep it as far away as possible from the TV.
Making Video and
Audio Connections
Audio Connections
Your TV includes several types of video inputs. When connecting your TV,
use the inputs that are available on your devices that provide the best video
performance, as described below.
use the inputs that are available on your devices that provide the best video
performance, as described below.
Best Video
Performance
Performance
Connector type
Separate audio
connection required
connection required
HDMI
(High-Definition Multimedia Interface)
(High-Definition Multimedia Interface)
No
Component video
(480i/480p/720p/1080i)
(480i/480p/720p/1080i)
Yes
S VIDEO
Composite video
RF/Coaxial
No
Y
P
B
P
R
L-AUDIO-R
When you connect video equipment to both the VIDEO and the S
VIDEO input jacks, make sure Auto YC in the Setup settings is set
to On to view the S VIDEO input (see page 61).
VIDEO input jacks, make sure Auto YC in the Setup settings is set
to On to view the S VIDEO input (see page 61).