Справочник Пользователя для Sony wega klv s23a10

You can connect a variety of optional equipment to your TV. This section 
provides some of the individual connections you can make. For multiple 
connections, please refer to the Quick Setup Guide.

This scenario shows a VCR with Cable signals connected through the video 
inputs and the Antenna connected through the VHF/UHF input. The Cable 
or VCR signals are selected by the VCR through the video inputs while TV 
signal is selected by the TV tuner.

Connect the CATV cable to the VCR’s VHF/UHF input jack.

Connect the supplied 75-ohm coaxial cable from the antenna to the 
TV’s VHF/UHF input jack.

Use an A/V and S VIDEO cables to connect the VCR’s AUDIO and 
S VIDEO output jacks to the TV’s AUDIO and S VIDEO input jacks 
(VIDEO 1 or 3).

Run the Initial Setup Program, as described in “Setting Up the Channel 
List” on page 30.

z

The most common 
setup is the Cable input 
into the VCR Antenna 
IN, the VCR Antenna 
Out to the VHF/UHF 
input.

Rear of TV

A/V cable

CATV cable

VCR

75-ohm 
coaxial cable

S VIDEO

VIDEO 
(yellow)

AUDIO-L 
(white)

AUDIO-R 
(red)

S VIDEO cable