для Sony wx-c570r
10
EN
To locate the succeeding tracks
To locate the preceding tracks
SEEK/AMS
Fast-winding the tape
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired point.
side of (SEEK/AMS). Release the button
when you have found the desired point.
To start playback during fast-forwarding or
rewinding, press (TAPE) (
rewinding, press (TAPE) (
*).
Locating the beginning of a track
— Automatic Music Sensor (AMS)
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
(SEEK/AMS) momentarily.
Note
The AMS function may not work when :
— the blanks between tracks are shorter than four
The AMS function may not work when :
— the blanks between tracks are shorter than four
seconds.
— there is noise between tracks.
— there are long sections of low volume or quiet
— there are long sections of low volume or quiet
sections.
Changing the displayed items
Each time you press (DSPL) during tape
playback, the display changes as follows:
playback, the display changes as follows:
z
Tape playback z Clock z
Frequency*
1
Z
MOTION DISPLAY*
2
Z
*
1
While the ATA function is activated.
*
2
All the items above are scrolled in the display
one by one in order.
one by one in order.
10
9
8
7
SETUP P MODE
6
5
4
REP
Playing tracks repeatedly
— Repeat play
You can repeat play the current track.
1
During playback press (SHIFT).
Every time you press (SHIFT), only the
items you can select light up.
Every time you press (SHIFT), only the
items you can select light up.
2
Press (4) (REP) repeatedly until “REP-
ON” appears.
Repeat play starts.
ON” appears.
Repeat play starts.
3
Press (SHIFT).
To go back to the normal playback mode,
select “REP-OFF” in step 2 above.
select “REP-OFF” in step 2 above.
Fast-forward
Rewind
SEEK/AMS