Справочник Пользователя для Sony xplod xr-ca430x
10
Storing only the desired
stations
stations
You can manually preset the desired stations on
any chosen number button.
any chosen number button.
1
Press
(SOURCE)
repeatedly to select
the radio.
2
Press
(MODE)
repeatedly to select the
band.
3
Press either side of
(SEEK/AMS)
to
tune in the station that you want to
store.
store.
4
Press the desired number button (
(1)
to
(6)
) for 2 seconds until “MEM”
appears.
The number button indication appears in the
display.
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
If you try to store another station on the same number
button, the previously stored station will be erased.
Receiving the stored stations
1
Press
(SOURCE)
repeatedly to select
the radio.
2
Press
(MODE)
repeatedly to select the
band.
3
Press the number button (
(1)
to
(6)
)
on which the desired station is stored.
If preset tuning does not work
— Automatic tuning/Local Seek Mode
Automatic tuning:
Press either side of
(SEEK/AMS)
to
search for the station (automatic
tuning).
tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
station. Repeat until the desired station is
received.
Local Seek Mode:
If the automatic tuning stops too
frequently, press
frequently, press
(SENS)
repeatedly
until “LOCAL-ON” appears.
Only the stations with relatively strong
signals will be tuned in.
signals will be tuned in.
To cancel the local seek mode, select “LOCAL-
OFF.”
OFF.”
Tip
If you know the frequency of the station you want to
listen to, press and hold either side of
If you know the frequency of the station you want to
listen to, press and hold either side of
(SEEK/AMS)
to
locate the approximate frequency, then press
(SEEK/AMS)
repeatedly to fine adjust to the desired
frequency (manual tuning).
If FM stereo reception is poor
— Monaural Mode
During radio reception, press
(SENS)
repeatedly until “MONO-ON” appears.
The sound improves, but becomes monaural
(“ST” disappears).
(“ST” disappears).
To return to normal mode, select “MONO-OFF.”
“LCL” indicator is displayed
“MONO” indicator is displayed