Справочник Пользователя для Panasonic AJ- G
E-8
EN
GL
IS
H
Parts and functions
(Continued)
!7" CHECK/5-button
In recorder mode:
This is the recording confirmation button. If
the button is pressed when recording is
paused, the recording can be checked.
The lamp flashes when the tape is rewound
and is turned on when the tape is replayed.
In scene file mode:
5 is selected as the number for the scene
file to be saved or loaded.
This is the recording confirmation button. If
the button is pressed when recording is
paused, the recording can be checked.
The lamp flashes when the tape is rewound
and is turned on when the tape is replayed.
In scene file mode:
5 is selected as the number for the scene
file to be saved or loaded.
!8" REC S/S / SAVE button
In recorder mode:
This is the start/stop button for recording.
This button is operated in the same way as
the REC START button on the camera
recorder, and the lamp is on during
recording.
In scene file mode:
This button is operated in the same way as
the SAVE button for scene data.
The current data are stored in the file on the
remote controller, which is selected by using
the buttons from
This is the start/stop button for recording.
This button is operated in the same way as
the REC START button on the camera
recorder, and the lamp is on during
recording.
In scene file mode:
This button is operated in the same way as
the SAVE button for scene data.
The current data are stored in the file on the
remote controller, which is selected by using
the buttons from
!3" to !7".
!9" RECORDER WARNING lamp
This lamp flashes or is turned on when an
error occurs on the camera recorder, just
like the WARNING lamp on the camera
recorder. For details, refer to the operation
manual of the camera recorder.
error occurs on the camera recorder, just
like the WARNING lamp on the camera
recorder. For details, refer to the operation
manual of the camera recorder.
AJ-RC10G.book 8 ページ ２００６年７月２６日 水曜日 午前９時２５分