Справочник Пользователя для Panasonic AJ-HD1400P

46

*1 Displayed menus may vary depending on the settings in

menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).

*A The SBC (Sub Code Data) area is an area that exists

separately from the video and audio area on the helical
track and contains the tape management information,
such as the time code, in compliance with the SMPTE/
EBU and the recording time. As with the ordinary LTC
(Linear Time Code), the time code can be read even
when rewinding/fast-forwarding and can be read out
when the tape stops.

*B The VAUX (Video Auxiliary Data) area is an area in the

video area on the helical track and contains information
related to the video data.

“_____” indicates the factory setting.

For selecting the editing mode range when the VTR is 
operating in the REGEN mode while performing 
editing operations with “AUTO” selected as the menu 
item No.503 TCG MODE setting.
0000

Regeneration applies during assemble or insert 
editing.

Regeneration applies during assemble editing.

Regeneration applies during insert editing.

<Note>
At the time of frame-by-frame shooting, the 
operations are equivalent to assemble editing.

For selecting the time code to be used when an 
external time code is used.
0000

The LTC information of the TIME CODE IN 
connector is used.

The LTC information added to the serial signals 
which are supplied to the HD SDI IN connector is 
used.

The VITC information added to the serial signals 
which are supplied to the HD SDI IN connector is 
used.

<Note>
When selecting “1394” with the INPUT VIDEO switch 
on the front panel, the time code input to IEEE1394 
digital input/output connector is used.
The VITC information will not be superimposed onto 
the video signal output when recording is performed 
or the EE mode is established. The LTC information 
and VITC information are not superimposed onto the 
HD serial output signals.

For setting the usage status for the user bits of the 
time code generated by the TCG.
0000

No character set specified

8-bit character set complying with the ISO646 and 
ISO2022 standards

Undefined

Undefined

Undefined

Page/line

Undefined

Undefined

For setting whether to control the phase correction of 
the LTC output during playback.
0000

The phase correction is not controlled.

The phase correction is controlled.

For selecting whether to set the CF flag of the TCG to 
ON.
0000

The CF flag is set to OFF.

The CF flag is set to ON.

For selecting whether to use the DF or NDF mode for 
CTL and TCG.
0000

The drop frame (DF) mode is used.

The non-drop frame (NDF) mode is used.

When the TCG switch of the front panel is set to EXT, 
it switches the phase of time code output from the TC 
OUT connector for external LTC input. (In EE mode 
only)
0000

Match the output image.

Match the external time code input.

For selecting how to output the VITC signal which is 
superimposed onto the output video signal.
0000

In the playback mode, the time code recorded in 
the SBC area*

A

 is output.

In the playback mode, the time code recorded in 
the VAUX area*

B

 is output.

<Notes>
z The VITC information which is detected by the HD 

serial input is automatically recorded in the VAUX 
area when the images are recorded.

z When “23/24,” “25(HD),” “25(SD),” “50(HD)” or 

“50(SD)” is selected as the menu item No.25  
SYSTEM FREQ setting and VAUX is selected as 
the VITC OUT setting, the time code which is 
output may not be continuous.

For selecting whether to superimpose the VITC 
information onto the HD serial output.
0000

The VITC information is not superimposed.

The VITC information is superimposed.

For selecting whether to superimpose the LTC 
information onto the HD serial output.
0000

The LTC information is not superimposed.

The LTC information is superimposed.