Справочник Пользователя для Panasonic AJ-HD1400P

49

*1 Displayed menus may vary depending on the settings in

menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).

*UP: With HD output (HD tape playback or up-converted

output)

*DW: With SD output (SD tape playback or down-converted

output)

“_____” indicates the factory setting.

For adjusting the setup ( or black) level of the HD SDI, 
analog component output, SD SDI output and analog 
composite output. (–10 

o to +10 o)

<Note>
This setting takes effect when “CMPST” has been 
selected as the menu item No.650 setting.

For setting whether to clip what is below the pedestal 
level for the Y (luminance) signal of composite output 
and SD SDI output.
0000

What is below the pedestal level is not clipped.

What is below the pedestal level is clipped.

For selecting ON or OFF for the closed caption signal 
in the first field.
0000

Forced blanking

No blanking

For selecting ON or OFF for the closed caption signal 
in the second field.
0000

Forced blanking

No blanking

This selects the composite output signal in HD mode.
0000

The signal is output with no setup added.

The signal is output from line 22 with a 7.5% setup 
added.

The signal is output from line 21 with a 7.5% setup 
added.

The signal is output from line 20 with a 7.5% setup 
added.

This selects the composite output signal in SD mode.
0000

The signal is output with no setup added.

The signal is output from line 22 with a 7.5% setup 
added.

The signal is output from line 21 with a 7.5% setup 
added.

The signal is output from line 20 with a 7.5% setup 
added.

For setting whether to superimpose EDH onto the SD 
SDI output.
0000

EDH is not superimposed.

EDH is superimposed.

For selecting the mode of the edge subcarrier 
reduction (ESR) operation in the playback circuit.
0000

ESR is forcibly turned off.

ESR is automatically set to ON or OFF depending 
on the unitÅfs operation.

For selecting the cross color processing during 
playback.
0000

The cross color is output as is.

The cross color can be reduced.

For selecting whether to superimpose the VIDEO 
INDEX signal on the SD SDI output signal.
0000

The VIDEO INDEX signal is not superimposed on 
the SD SDI output signal.

The VIDEO INDEX signal is superimposed on the 
SD SDI output signal.

This is used to select the method to process the 
image compression during recording.
0000

The images are recorded using the regular 
compression processing.

The images are recorded while minimizing the 
compressed image distortion which arises in the 
dark areas below about 10 IRE (70 mV).

<Notes>
z This setting is valid when recording in the 720p 

mode.

z When “DARK” has been selected, the COMP lamp 

lights.

This selects whether or not to record the UMID 
information on the tape.
0000

UMID information is not recorded on the tape.

The UMID set in menu No. 691 UMID GEN is 
recorded. If no Basic UMID is available in the input 
signals, a Basic UMID of the unit, which is newly 
generated, is recorded.

<Note>
UMID information cannot be rewritten in this unit.

This selects a UMID that is recorded when menu No. 
690 UMID REC is turned “ON”.
0000

Newly created basic UMID information of this unit 
is always recorded.

The UMID information of the input signals is 
recorded.  If no UMID is available in the input 
signals, a Basic UMID of the unit, which is newly 
generated, is recorded.

<Note>
The source pack (of the UMID information) of the 
input signal will be recorded on the tape, regardless 
of this menu’s setting.