Справочник Пользователя для Panasonic CF-72 Series

25

At the confirmation message , press  

   .

The operation of reinstallation for the hard disk starts au-

tomatically.

(In the case of Windows 2000, only Product Recovery

CD-ROMs 1 to 3 can be used.)

After the reinstallation procedure completes, the follow-
ing message will appear on the display.

Windows(R) XP Professional install wizard will start after reboot.

Restore process will execute more after Windows(R) XP Professional install

wizard.

Restart the computer after removing Product Recovery CD-ROM.

Windows(R) 2000 Professional install wizard will start after reboot.

Restore process will execute more after Windows(R) 2000 Professional install

wizard.

Restart the computer after removing Product Recovery CD-ROM.

Remove the Product Recovery CD-ROM, then restart the
computer by pressing  

     + 

     +  

 .

When the message [Press F2 to enter SETUP] is displayed,

press    

    and then run the Setup Utility.

If the password has been set, enter the Supervisor Pass-

word.

Press    

  .

At the confirmation message, select [Yes] and then press

   

   .  (The Setup Utility settings will return to their

default values.  Even the security settings with the excep-

tion of the password(s) will return to their default values.)

Change the settings where necessary.

If there are added functions that are not listed in the

Specifications of this Operating Instructions, we rec-

ommend disabling their device settings. If the settings

are enabled, additional operations may be necessary

during the Windows setup procedure. (We also rec-

ommend referring to the Supplementary Instructions,

if they are included with the computer.)

When the message [Operating System not found] is

displayed, press   

     +   

Alt 

    +   

and perform the operations from Step 

12 

to Step 15.

If you fail to press   

   in Step 

12 

, restart the com-

puter and perform the operations from Step 

12 

 to Step

 after finishing Windows setup procedure.

 Using either      or      , select [Exit] and then select
[Save Current Values], then press    

   .

At the confirmation message, select [Yes] and press

   

   .

Turn the computer off, and then turn the computer on.

Perform the setup procedure for Windows by following

the instructions on the screen.

(Refer to the Supplementary Instructions, if they are in-

cluded with the computer.)

 Page 11

 page 12

Run the Setup Utility and change the settings where nec-

essary.

Do not cancel the reinstall procedure before it is

completed.

When a message appears instructing you to insert

the next CD, insert the recovery CD showing the

next number in the sequence, and then select [OK].

If the message “The media does not contain the cor-

rect file” appears, select [OK]. A message will ap-

pear instructing you to insert the next CD.

Confirm that the proper recovery CD has been in-

serted by opening the tray of the CD drive and then

close the tray, then select [OK].