Справочник Пользователя для Panasonic cq-c5210u

36

37

(page 38)

"]: Up

#]: Down

Note:
≥ Press [DISP] (display) to return to the 

regular mode.

≥ If no operation takes place for more than 

5 seconds in audio setting (2 seconds 
in the volume setting, 10 seconds in SQ 
adjustment), the display returns to the 
regular mode.

≥ The volume can also be adjusted directly 

using [VOLUME] on the main unit.

 (page 

23)

1

  Press [VOLUME]

(SEL: select).

Default:18 

Setting range: 0 to 40 

You can adjust the bass and treble sound.

Default:  BAS (bass) 0 dB

TRE (treble) 0 dB

Setting range: 

j12 dB to i12 dB (by 2 dB)

You can adjust the characteristics of the currently 
selected sound type (SQ).
It is also possible for a maximum of 5 different 
adjusted SQ to be preset.

Adjustable frequency:
60 Hz, 160 Hz, 400 Hz, 1 kHz, 3 kHz, 6 kHz, 16 kHz
Setting range: 

j12 dB to i12 dB (by 2 dB)

≥ Setting of SQ, bass/treble and volume are 

infl uenced one another. If the infl uence 
mentioned above causes distortion to the audio 
signal, readjust bass/treble or volume.

2

 Turn [VOLUME]. 

(Press [VOL 

"] or [VOL #] on the remote control unit.)

"]: Increased

#]: Decreased

"]: Increased

#]: Decreased

(Push.)

Select

Select

Select

Select

[VOLUME 

"]

[VOLUME 

#]

VOL

6

5

#

[DISP]
(Display)

[SEL]
(Select)

"]

#]

1

 Press  [

$] or [%] to select a frequency.

  [

$]: Increased

%]: Decreased

2

 Turn  [VOLUME 

"#].

  [VOLUME 

"]: Increased

#]: Decreased

3

 Press and hold one of the buttons from [2] to [6] for 

more than 2 seconds.

 

≥  The adjusted SQ is preset in the number of 

the selected button, and the regular display is 
restored.

∫ To return an adjusted SQ to the default setting

1

 Press  [SQ], and select the SQ which is to be returned 

to the default setting.

2

 Press and hold [BAND] for more than 2 seconds.

%] [$]

Note:
≥ Only buttons [2] to [6] can be used to 

preset the adjusted SQ. An adjusted SQ 
cannot be preset in button [1].

≥ To call a preset SQ, refer to page 25.
≥ While the SQ adjustment mode is 

established, only adjustments are 
performed, and even if the adjustment 
mode is exited without presetting an 
adjusted effect, what has been set will be 
refl ected as the current SQ until another 
SQ is selected.

≥ Even when the SQ presets are adjusted, 

the display which appears when the 
settings are called remains unchanged.

≥ The SQ adjustment mode can be 

established also by pressing [SQ] for 
more than 2 seconds.

(Example: Radio mode)

[2] to [6]
(SQ preset 
buttons)