Справочник Пользователя для Panasonic cq-c9700w
CQ-C9800W/C9700W
English
Power on
Press [SOURCE] (PWR: Power).
Notes:
¡
The opening screen appears. You can overwrite the
opening screen with new one. (
opening screen with new one. (
a
page 36)
¡
The demonstration message appears for first use. (
a
page 14)
Power off
Hold down [SOURCE] (PWR) until you
hear a beep, then release it.
Note: The ending screen appears. You can overwrite the
ending screen with new one. (
ending screen with new one. (
a
page 36)
16
General
This chapter explains how to turn on or off the power, how to adjust the volume, etc.
CQ-C9800W/C9700W
17
You can remove the face
plate to prevent it from
being stolen.
plate to prevent it from
being stolen.
Removing
1
Turn off the power
(
a
page 16)
2
Press [
] (Release).
(The face plate disen-
gages with a click
when it is removed.)
gages with a click
when it is removed.)
The front panel automatically closes in 5 seconds if
it is open or tilted.
it is open or tilted.
The power is automatically turned off while the unit
is active.
is active.
3
Put the face
plate in the case.
Mounting
1
Slide the left side of the removable face
plate in place.
2
Press the right end of removable face
plate until “click” is heard.
Press it until you hear a click.
Cautions:
¡ It is recommended to remove or mount the face
plate when the plate is at the closed position.
Do not remove or mount the plate when the plate is
in motion.
Do not remove or mount the plate when the plate is
in motion.
¡ This face plate is not waterproof. Do not expose it to
water or excessive moisture.
¡ Do not remove the face plate while driving your car.
¡ Do not place the face plate on the dashboard or
¡ Do not place the face plate on the dashboard or
nearby areas where the temperature rises to high
levels.
levels.
¡ Do not touch the contacts on the face plate or on the
main unit, since this may result in poor electrical
contacts.
contacts.
¡ If dirt or other foreign substances get on the con-
tacts, wipe them off with clean and dry cloth.
¡ To avoid damaging the front panel, do not push it
down or place objects on it while it is open.
Open/Eject
Press [
] (OPEN).
When a disc is already loaded, the disc will automatically
be ejected.
be ejected.
Close
Press [
] (OPEN).
Tilt
The display angle changes among 4 levels as follows
every time you hold down [
every time you hold down [
] (TILT) for 1 sec. or
more and release.
Note: The last selected
angle is maintained even
after turning off the power.
angle is maintained even
after turning off the power.
Notes:
¡
The volume level can be set independently for each
source. (For radio, one volume setting for AM, one
volume setting for all FMs)
source. (For radio, one volume setting for AM, one
volume setting for all FMs)
¡
The volume is not adjustable while an error display is
on the monitor. (
on the monitor. (
a
page 50)
q Up
w Down
w Down
Setting Range: 0 to 40
Default: 18
Volume off (down)
Press [MUTE].
Cancel
Press [MUTE] again.
Note:
Volume-down range can be specified. (
a
page
34)
General
Power On/off
(PWR: Power)
Front Panel Motion (Open/Close, T
ilt)
(OPEN/CLOSE, TILT)
V
olume Adjustment
(VOLUME)
Temporar
y V
olume Off (Down)
MUTE (ATT: Attenuation)
Cautions:
¡ To avoid damaging the front panel, do not push it
down or place objects on it while it is open.
¡ Do not pinch your finger or hand in the front panel.
¡ Do not insert foreign objects into the disc slots.
¡ For the following cases, the front panel automati-
¡ Do not insert foreign objects into the disc slots.
¡ For the following cases, the front panel automati-
cally closes. Use caution not to catch your finger.
¡
After a lapse of 20 seconds
¡
When a disc is inserted
¡
When the face plate is removed (
a
page 16)
TILT 1
TILT 2
TILT 3
TILT 2
TILT 3
OPEN
Face Plate Removing/Mounting
(Anti-Theft System)
CQ-C9800W
BAND
CQ-C9800W
BAND
CQ-C9800W
BAND
CQ-C9800W
BAND