Справочник Пользователя для Panasonic cq-r223wa

1

2
3
4

Mounting spring (L)

23

22

Cautions:
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and

fingers.

After fixing Mounting Bolt t connection and
Power Connector y, fix the rear of the unit to the
car body by either method (a) or (b) shown on the
previous page.

Insert Trim Plate i.

First complete the electrical connections, and
then check them for correctness.(

a

page 25)

Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.

The included Mounting Collar
q is designed specially for this
unit. Do not use it to attach any
other model.

y Power Connector 

Engage Mounting
Springs (

C) in the both

sides of the mounting
holes of Mounting Collar
q firmly.

Mounting Spring

Mounting
Hole

Tab

q Mounting 

Collar

Mounting Springs (R)

Mounting Holes

t Mounting Bolt

The tabs to be bent vary depending on the car.
To securely install the unit, fully bend a
number of the tabs so that there is no rattling.

Switch off the power of the unit.

Remove the removable face plate.

 Press [

]. (release button). The

removable face plate will be released.

1

Remove the Trim Plate i with a screwdriver.

2

 Insert the Dismounting Plates u along the

grooves on both sides of the main unit
until “click” is heard.

 Pull out the unit while pushing the plates

further inside.

3

Remove the unit pulling with both hands.

4

Push

Contact

i Trim Plate

Screwdriver

u Dismounting Plate

Insert

Pull out

Release button

Insert the tab
end in the
outer groove.

“Click”