Справочник Пользователя для Panasonic cq-srx7000n

Скачать
Страница из 58
44
CQ-SRX7000N
41
E
N
G
L
I
S
H
AUX-IN
CH.C-IN
S
·
W-OUT
REAR
FRONT
CENTER
(L)(White)
(R)(Red)
(L)(White)
(R)(Red)
(L)(White)
(R)(Red)
    (White)
     (Red)
AUX Input Cord
Pre-Out Cord
 
(Center)
Pre-Out Cord
 
(Front)
Pre-Out Cord
 
(Rear)
Antenna
CD Changer Input Cord
(L)
(White)
(R)(Red)
DIN Cord
A
Extension Cord
 (DIN/BATT/RCA/GND)
RCA Cord
B
Sub-Woofer Cord
 
(Monaural)
(R)(Red)
(L)
(White)
(White)
(Supplied to CX-DP9061EN)
Electrical Connections
Cautions:
¡Check the connectors provided on your car (see
precaution below) before connecting the system.
¡This unit is designed for use in a car having a 12-
volt negative ground battery system.
¡To prevent damage to the unit, be sure to follow the
connection diagram below.
¡Strip about 5 mm of the lead ends for connection
(only non-ISO connector cords).
¡Do not insert the power connector into the unit
until the wiring is completed.
¡Be sure to insulate any exposed wires to prevent
short circuiting with the car chassis.  Bundle all
cables, and prevent cable terminals from touching
any metal parts.
Precautions (ISO Connector)
¡The pin arrangement of the power connector
conforms to ISO standard.
¡The pin arrangement of ISO connectors in some
cars may differ from the ISO standard.
¡Please check that the pin arrangement of the
connector in your car conforms to ISO standard.
¡For car types A and B, change the wiring of the
red and yellow leads as shown at right.
¡After connection, insulate the portions marked
(C) with insulating tape.
Note: For cars other than types A and B, please
consult your local car shop.
A7 :
A4 :
C
C
A7
A4
BATTERY 15A
ACC
C
C
BATTERY 15A
ACC
A7 :
A4 :
BATTERY 15A
ACC
C
C
A7 :
A4 :
ISO
A
B
Standard ISO
Car Type A
Car Type B
IGN or ACC switched 12V supply
(Red)
(Yellow)
(Yellow)
(Red)
(Red)
(Yellow)
(Yellow)
(Red)
(Red)
(Yellow)
(Red)
(Yellow)
IGN or ACC switched 12V supply
+12 V Battery (Permanent supply)
+12 V Battery (Permanent supply)
+12 V Battery (Permanent supply)
No connection
Cable Wiring Diagram
Example : Connection with CD changer CX-DP9061EN
(Option)
yISO Antenna
Adapter
(If needed)