Справочник Пользователя для Panasonic CU-E12GKE

0!42/,

3%.3/2

• In heat mode, it takes a while for the unit to warm up. The

power indicator blinks during this operation.

HOW TO OPERATE

Remote

control

display

REMOTE CONTROL TRANSMITTER

AUTO MODE - FOR YOUR CONVENIENCE

HEAT MODE - TO ENJOY WARM AIR

• Make sure it is not

obstructed.

• Certain fl uorescent lights

may interfere with signal
transmission. Please
consult your nearest
dealer.

Maximum distances : 8m

RECEIVER

Insert AAA or
R03 batteries

Pull out

Inserting the batteries

• The batteries can be used for approximately 1 year.

Replace the batteries when the remote control display or
transmission signal becomes weak.

Setting the current time

Select

Turn on

Adjust

temperature

Set time

Confi rm

Press

REMOTE CONTROL PREPARATION

MODE OPERATION

AUTO

HEAT

DRY

COOL

INDICATOR

• Unit selects the operation mode according to temperature

setting, outdoor and room temperature.

• Operation mode is reselected every 30 minutes. During

operation mode selection the power indicator blinks.

Notes:
• Press RESET button to restore the remote control’s

default setting.

• For normal operation, the

and RESET buttons are not

in use.

• While using remote control, please be aware of the OFF

indication on the remote control display to prevent the unit
from starting / stopping improperly.

• PATROL operates automatically once the unit is switched on

with

button.

COOL MODE - TO ENJOY COOL AIR

• During soft dry operation, the indoor fan operates at low

fan speed to give a very gentle cooling operation.

● The range of temperature for selection is

16°C ~ 30°C.

● Operating the unit within the recommended

temperature could induce energy saving.
HEAT MODE : 20°C ~ 24°C.
COOL MODE : 26°C ~ 28°C.
DRY MODE : 1°C ~ 2°C lower than room temperature.

DRY MODE - TO DEHUMIDIFY THE

ENVIRONMENT