Справочник Пользователя для Panasonic cy-vm7203n

40

41

39

40

If the suggestions in the charts do not solve the problem, 
we recommend that you take it to your nearest authorized 
Panasonic Service Centre. The product should be serviced 
only by a qualifi ed technician.

Use fuses of the same specifi ed rating (3 A). Using 
different substitutes or fuses with higher ratings, or 
connecting the unit directly without a fuse, could cause 
fi re or damage to the unit. 
If the replacement fuse fails, contact your nearest 
Panasonic Service Centre for service.

Reset switch
Insert a hard, slender stick into the hole and push the 
switch. 

IMPORTANT
Press the switch only when the unit fails to operate with 
any buttons. (Stored settings and adjustments are not 
cleared.) If the unit fails to return to normal condition, call 
the nearest Panasonic Service Centre and ask for repairs.
Note:
  If the ID-CODE has been already set, you will be asked 

to enter the ID-CODE right after the unit is restarted. 

When the unit is dirty, wipe the surface of the display 
using the Wiping Cloth (supplied). 
Cleaning without the supplied cloth



 Moisten the soft cloth in dishwashing soap diluted 

with water and wring well. 



 Wipe lightly. Go over the same surface with a dry 

cloth. 

 If water drops or similar wet substances get inside 

Note:
  Since there is the possibility of water drops getting 

inside of the unit, do not directly apply cleanser to the 
surface. 

  Do not scratch the screen with your nails or other hard 

objects. The resulting scratches or marks will obscure 
the images. 

Your product is designed and manufactured to ensure a 
minimum of maintenance. Use a dry soft cloth for routine 
exterior cleaning. Never use benzine, thinner or other 
solvents. 

Pesticide 
 

Alcohol

Thinner

Benzine

Wax

Power supply: 

DC 12 V (11 V–16 V), test 
voltage 14.4 V, 

 negative 

ground

Current consumption: 

Less than 1.0 A

Maximum power output
(For built-in speaker): 

0.7 W 

Video input signal: 

Composite video signal, 1.0 
Vp-p (75 

)

Audio input sensitivity: 

2 Vrms

Video output signal: 

Composite video signal, 1.0 
Vp-p (75 

)

Dimensions (W

HD): 17850165 mm

Weight: 1.6 

k

Liquid crystal panel: 

7 inches wide

Screen dimensions (W

HD):  

 143

79163 mm

Number of pixels: 

336 960 pixels

 (234 

vertical



480 horizontal

3)

Valid pixel ratio: 

Over 99.99 %

Display method: 

Transparent colour fi lter 
format

Drive method: 

TFT (Thin Film Transistor) 
active matrix format

Light source: 

Internal light (Built-in small 
fl uorescent lamp)

Note:
 Specifi cations and design are subject to modifi cation 

without notice due to improvements. 

  Some fi gures and illustrations on this manual may be 

different from your product. 

 For customers within the UK: 08705 357357 
 For customers within the Republic of Ireland: 01 289 

8333 

  Visit our website for product information 
  E-mail: customer.care@panasonic.co.uk

  Order accessories and consumable items for your 

product with ease and confi dence by phoning our 
Customer Care Centre Monday - Thursday 9:00am - 
5:30pm, Friday 9:30am - 5:30pm. (Excluding public 
holidays).

 Or go on line through our Internet Accessory ordering 

application at www.panasonic.co.uk. 

 Most major credit and debit cards accepted. 
 All enquiries transactions and distribution facilities are 

provided directly by Panasonic UK Ltd. 

 It couldn’t be simpler! 
 Also available through our Internet is direct shopping 

for a wide range of fi nished products, so take a browse 
on our website for further details.