Справочник Пользователя для Panasonic dmr-e100heb

∫ Advanced Operations

[HDD] [RAM]

[6] Press 

 (“To find 

the desired points”, 
page 42)

[7] Press 

[8] Select “Exit” with [

3, 4] and press 

[9] Select 

2] and 

≥Play lists created 

with the erased 
part are also erased.

ªTo erase another part of the same programme

After storing the point in “Start” and “End”, select “Next” in step 8 
and perform step 9, then repeat steps 6–9.

For your reference
≥Use search and slow-motion to find the points.
≥You may not be able to specify start and end points within 

3 seconds of each other.

≥You cannot specify start and end points if the picture recorded is 

stilled.

≥The unit pauses when the programme reached to the end during 

this procedure.

≥The disc’s available recording time may not increase after 

erasing short parts of programmes.

[HDD] [RAM]

You can divide a selected programme into two.
You must make sure of dividing a programme because it 
cannot be recovered after the procedure.

[6] Press 

(“To find the desired 
points”, page 42)

[7] Select “Exit” with [

3, 4] and press 

[8] Select 

2] and press 

≥The programme is 

divided at the point.

ªTo change the point to divide

Select “Divide” in step 6, then repeat steps 6–8.

ªTo check the division point

By selecting “Preview” in step 6 and pressing [ENTER], play will 
begin from 10 seconds prior to the division point to 10 seconds 
after the division point.
You can make sure that the division point is appropriate.

Note
≥A little portion of the recording directly preceding the division 

point may be lost.

For your reference
≥The divided programmes retain the title of the original 

programme. They also remain CPRM property (page 10) of the 
original.

≥Use search and slow-motion to find the points.
≥It is not possible to carry out “Divide” in the following cases:

- When the resulting part(s) are extremely short.
- When the total number of programme is more than 250 (HDD)/

99 (DVD-RAM).

[DVD-R]
You can select the still picture to be displayed after finalizing.
Usually, the top scene of the programme (scene of 1 second after 
starting) appears. However, you can select your favourite scene in 
the programme.

[6] Press [PLAY/

t1.3] to play.

[7] Press 

(“To find the desired points”, page 42)

[8] Press 

≥A scene of display 

is changed at the 
point.

≥You cannot select the 

top and end of the 
programme.

1 Partial Erase

3

Current programme number

3

3

1 Divide

3

1 Change thumbnail

3

3

DVD(B).book  41 ページ  ２００３年８月５日 火曜日 午後３時３０分