Справочник Пользователя для Panasonic dmr-e100heb

∫ Advanced Operations

You can organize the recorded programme by erasing or other 
operation.
≥Check available cards (page 11).

Preparation
≥Release protection (disc 

# page 37, cartridge # page 69, 

card

# page 11).

≥Inset a disc or card (pages 19, 48)

[1]

 (page 29)

[2] Select “SD 

3, 4, 

2, 1] and 
press 
[ENTER].

[3] Check if “Input” is selected and press 

[4] Select the drive (HDD/DVD/SD CARD/

3, 4] and press 

[5] Use [

3, 4] to select a desired item 

ªTo stop it halfway

Press [RETURN].

[SD] [CARD] [HDD] [RAM]

[6] Use [

3, 4] 

[7] Press 

≥The picture is enlarged 

according to the display frame in this unit (320

k240). Therefore, 

the aspect ratio may differ from that of the original picture.

≥You can also select the programme by entering a 3-digit number 

with the numeric buttons.

≥When there are many folders on Mobile hard disk other than 

displayed, you can move to them with [

:, SKIP] or 

[

9, SKIP].

≥The recording date may differ from that of the original data.
≥In case of a TV station with Teletext information, the title of the 

TV programme is entered automatically, provided the “Title page” 
is correctly set. (page 64)

≥In case of a TV station with Teletext information, it may take over 

30 minutes to get the title or may fail to get.

The programme is not allowed to record by copy-guard.

t The programme cannot be played.

The audio cannot be output in this programme.

The title cannot be entered on this programme.

For your reference
When playing back SD VIDEO (MPEG4), the recording mode 
cannot be displayed because the bit rate is changed according to 
the picture quality. You can check the bit rate of the recorded 
programme in “Properties” (page 54).

[SD] [HDD] [RAM]

[6] Select “Yes” with [

2] and press 

[7] Select “Start” with [

2] and press 

All MPEG4 programmes are erased.

For your reference
≥Keep pressing [RETURN] for 3 seconds or more to cancel. (The 

programmes are erased until this unit recognizes the 
cancellation.) 

≥When All erase is carried out, the files which are not compatible 

with this unit may be erased.

[SD]
To erase all of contents of the card or to use unformatted 
card.

[6] Select “Yes” with [

2] and press 

[7] Select “Start” with [

2] and press 

≥Formatting starts.

For your reference
≥Do not turn the unit off or disconnect the AC mains lead  

until the ending message (only in All Erase and SD Card 
format) appears. The card may be disabled.

≥Once erasing and formatting are carried out, materials including 

the data from a computer cannot be recovered. Check them 
carefully before proceeding. (When formatting in SD Card format 
programme protect is set on them, all programmes are erased 
even if they are protected.)

1 Play

3

3

The following 
operation is possible 
on the SD VIDEO 
(MPEG4) playback 
screen.
≥To stop: Press 

[

∫, STOP].

≥To pause: Press 

[

;, PAUSE].

≥For Fast forward or 

rewind (SEARCH): 
Press [

6, SLOW/

SEARCH] or [

5, 

SLOW/SEARCH].
- When pressing these buttons, only the time display goes 

forward or backward while a part of the SD VIDEO (MPEG4) 
is displayed as a still picture.

- There are 3 search speeds. Each press increases the search 

speed.

≥To skip: Press [:, SKIP] or [9, SKIP]. (page21)
≥For manual skip: Press [MANUAL SKIP]. (page22)
≥To erase: Press [ERASE], then select “Erase” with [2] and 

press [ENTER].

≥To dub: “One Touch Dubbing”, page 33.

PLAY

PRG 1

HDD

0:00.36

≥You can turn on and off the indication 

on the upper right of the screen by 
[STATUS].

1 Erase all programmes

1 Format SD CARD

DVD(B).book  53 ページ  ２００３年８月５日 火曜日 午後３時３０分