Справочник Пользователя для Panasonic dmr-e65eg

53

RQT7449

To clean this unit, wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that 

came with the cloth carefully.

Observe the following points to ensure continued listening and 
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it 
impossible to record or play discs. 
Use the DVD-RAM/PD lens cleaner (LF-K123LCA1, where 
available) about once every year, depending on frequency of use 
and the operating environment. Read the lens cleaner’s instructions 
carefully before use.

∫ How to hold a disc or card

Do not touch the recorded 
surface or the terminal 
surface.

∫ If there is dirt or condensation on the disc

[RAM] [DVD-R]
≥Clean with an optional 

DVD-RAM/PD disc cleaner (LF-
K200DCA1, where available).

≥Do not use cleaners for CDs or 

cloths.

[DVD-A] [DVD-V] 

[VCD]

 

[CD]

Wipe with a damp cloth and then wipe dry.

∫ Handling precautions

≥Do not attach labels or stickers to discs. (This may cause disc 

warping and un-balanced rotation, rendering it unusable.)

≥Do not write on the label side with a ball-point pen or other writing 

instrument.

≥Do not use record cleaning sprays, benzine, thinner, static 

electricity prevention liquids or any other solvent.

≥Do not use scratch-proof protectors or covers.
≥Do not expose the terminals of the card to water, garbage or other 

strange things.

≥Do not use the following discs:

–Discs with exposed adhesive from removed stickers or labels 

(rented discs etc).

–Discs that are badly warped or cracked.
–Irregularly shaped discs, such 

as heart shapes.

≥Do not place in the following areas:

–In direct sunlight.
–In very dusty or humid areas.
–Near a heater.
–Where static electricity or electromagnetic waves occur.

≥The disc is dirty. Use a special cleaner and wipe clean.
≥You tried formatting a disc that is not compatible with this unit.

≥The unit writes the chapter information to the disc when you turn it off or remove the disc. 

The information is not written if there is an interruption to the power before this.

≥These operations are not possible with still pictures.
≥You cannot set points if they are too close to each other. You cannot set an end point before 

a start point.

≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter 

longer.

≥Available recording space on the DVD-R does not increase even after erasing previously 

recorded titles.

≥You cannot select all the chapters at once in a title if the title also includes still pictures. 

Select them individually.

≥This screen cannot be displayed during recording.

≥Release the card’s protection setting. (With some cards, the “Write protection Off” message 

sometimes appears on the screen even when protection has been set.)

≥The card format is not compatible with the unit. (The contents on the card may be 

damaged.)
Format using FAT 12 or FAT 16 with other equipment or format the card with this unit.

≥The card contains a folder structure and/or file extensions that are not compatible with this 

unit.

≥Turn off and then turn on the unit again.

≥When there are a lot of folders and files, it may sometimes take a few hours.
≥When repeating transferring (dubbing) or erasing, it may sometimes take a long time. 

Format the disc or card.

≥Make sure the PC card is slotted home firmly before attempting to remove.

53

7449g.book  53 ページ  ２００４年５月１２日　水曜日　午前１０時７分