Справочник Пользователя для Panasonic dmr-e51

[RAM] [DVD-R]

You can set your own programming conditions (up to 16 
programmes).

Preparation
≥Switch [DVD, TV] (15) to “DVD”.
≥Ensure that this unit’s clock is set correctly.
≥Insert a disc for recording (make sure there is enough room for 

the programme you are going to record plus a little extra).

≥The Timer Programme List screen appears.

A line that is ready for programming is highlighted.

(10).

≥The Timer Programme Correction screen appears.

1] (10) to move through the items and change 

3, 4] (10).

≥The current settings are shown each time you press [1] 

(10).

≥You may use the numeric buttons (4) to enter “Name”, 

“Date”, “Start” and “Stop”.

≥Name (Programme Position/TV Station Name)
≥Date

Current date

>the day before one month later>

Daily (Sunday to Saturday)

>Daily (Monday to Saturday)>

Daily (Monday to Friday)

>Weekly (Sundays)>...>

Weekly (Saturdays)

≥Start (start time)/Stop (finish time)

The time increases or decreases in 30-minute increments if 
you hold the button.

≥Mode (Recording mode)

XP

>SP>LP>EP>FR (page 19)

≥Title

Select “Title” and press [ENTER] 

(10), then refer to page 29 

for entering title.

(10) when you have finished making 

≥To continue programming:

Repeat steps 2, 3 and 4.

Press [

, TIMER] 

Ensure “

” lights on the unit’s display.

1) While the Timer Programme List Screen is being shown, use 

[

3, 4] (10) to select the programme you want to change, and 

press [ENTER] 

(10) to show the Timer Programme Correction 

screen.
≥You may also select programme by inputting a 2-digit number 

using the numeric buttons 

≥Use [2, 1] (10) to move to the page preceding or following 

the one on display.

2) Move through the items with [

1] (10) and change the settings 

with [

3, 4] (10) and press [ENTER] (10).

Notes
≥The built-in clock employs 24-hour system.
≥The remaining time is not shown if you insert discs other than 

DVD-RAM or DVD-R.

≥The remaining time displayed is calculated based on the current 

recording mode.

≥If the disc is protected (pages 30 and 64), the unit switches to 

standby but does not go on standby for recording. Check the disc 
carefully.

≥Recording is not possible unless you set “Disc Protection” in 

“DISC INFORMATION” to “Off”. (page 30)

≥You cannot record to a disc if the write protect tab on a cartridge 

disc is set to protect. Release this before operation (page 64).

≥Even if the unit is put in the timer recording standby mode or the 

timer recording is being performed, you can play a programme.

≥When recording more than one programme in a row, for 

DVD-RAM the first few seconds, and for DVD-R about the first 
30 seconds of all programmes from the second one onwards will 
not be recorded.

DVD(PAL).book  26 ページ  ２００３年５月２２日　木曜日　午後１２時３分