Справочник Пользователя для Panasonic dmr-e51

≥DVD-Video with a region number other than the number for this 

unit or “All”

≥Some DVD-R
≥DVD-RAM (2.6 GB/5.2 GB)
≥DVD-ROM
≥DVD-RW
≥DVD-Audio
≥iRW
≥CD-ROM
≥CDV
≥CD-G
≥CVD
≥SVCD
≥SACD
≥MV-Disc
≥PD
≥Photo CD
≥Divx Video Disc, etc.
≥Play of non-standard Video CDs and Super Video CDs is not 

guaranteed.

You can play DVD-R on compatible DVD players by finalizing 
[the process that allows recordings on DVD-R to be played on 
compatible DVD players, (page 32)] them on this unit, 
effectively making them into DVD-Video.

ªBefore finalizing

You can record onto the available space on the disc and perform 
editing functions, such as giving titles to discs and programmes 
and erasing programmes.
You cannot record to or edit DVD-R with this unit if it was recorded 
with another unit, whether it is finalized or not.
You cannot record over parts that have been recorded.
Erasing programmes will not increase the disc’s available time.

ªAfter finalizing

The video and audio is recorded according to the DVD-Video 
specifications, and your very own DVD-Video is created.
≥The titles you entered with this unit appear as menus.
≥Programmes longer than 5 minutes are divided into 5-minute 

chapters.

≥These DVD-R can no longer be recorded on or edited.
≥These DVD-R can be played on other DVD players, but this is not 

guaranteed.
Play may not be possible due to the player you are using, the 
DVD-R, or the condition of the recording. Use this unit to play the 
disc if the player is unable. 

For your reference
≥It takes about 30 seconds for the unit to complete recording 

management information after recording finishes.

≥To record on DVD-R, this unit optimizes the disc for each 

recording. Optimizing is carried out when you start recording after 
inserting the disc or turning the unit on. Recording may become 
impossible after the disc is optimized more than 50 times.

≥The first 30 seconds of a programme may not be recorded if you 

make successive timer recordings.

≥The video is recorded in a 4:3 aspect irrespective of the video 

signal input. Use the television’s screen modes to change the 
screen size for play.

≥Some broadcasts carry signals that allow you to make one copy, 

but you cannot record these broadcast with DVD-R. Use 
DVD-RAM to record these kinds of broadcast.

≥Play may be impossible in some cases due the condition of the 

recording.

≥We recommend using DVD-R manufactured by Panasonic as 

they have been tested to be compatible with this unit.

≥You cannot change audio type if a DVD-R is in the unit. Select 

the audio type (M1 or M2) before recording by going to “Bilingual 
Audio Selection” in the “Sound” menu.

Dolby Digital (pages 46 and 61)This unit can play Dolby Digital in stereo 
(2 channels). Connect an amplifier with a built-in 
Dolby Digital decoder to enjoy surround sound.

DTS Digital Surround (pages 46 and 61)Connect this unit to equipment that has a DTS 
decoder to enjoy DVDs with this mark.

When you use the discs recorded either PAL or NTSC, refer to this 
table.

*

1

If you select “NTSC” in “TV System” (page 53), the picture may 
be clearer.

*

2

If your television is not equipped to handle PAL 525/60 signals 
the picture will not be shown correctly.

≥DVD-RAM

You can also record signals which allow you to make one copy, 
onto these discs.

9.4-GB, double-sided, type 4 cartridge:

LM-AD240E

4.7-GB, single-sided, type 2 cartridge:

LM-AB120E
(set of 3, LM-AB120E3)

4.7-GB, single-sided, non-cartridge:

LM-AF120E
(set of 3, LM-AF120E3)

≥DVD-R

4.7-GB, single-sided, non-cartridge:

LM-RF120E

≥DVD-RAM/PD Disc cleaner:

LF-K200DCA1

≥DVD-RAM/PD Lens cleaner:

LF-K123LCA1

PAL

Yes

NTSC

Yes

PAL

No

NTSC

Yes*

1

PAL

Yes

NTSC

Yes*

2

 (PAL60)

DVD(PAL).book  9 ページ  ２００３年５月２２日　木曜日　午後１２時３分