Справочник Пользователя для Panasonic dmr-e30eb
32
Timer recording (continued)
ª
To change the programme
Timer Programme Correction screen (from step 3 on page 31)
1) Use [2, 1]
1) Use [2, 1]
(10) to select the item you want to change.
2) Change the setting with [3, 4]
(10).
≥
You may use the numeric buttons
(4) to enter “Name”,
“Date”, “Start” and “Stop”.
The items change as follows:
≥
≥
Name (Programme Position/TV Station Name)
≥
Date
Current date
Current date
>the day before one month later>
Daily (Sunday to Saturday)
>Daily (Monday to Saturday)>
Daily (Monday to Friday)
>Weekly (Sundays)>...>
Weekly (Saturdays)
≥
Start (start time)/Stop (finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
The time increases or decreases in 30-minute increments if
you hold the button.
≥
Mode (Recording mode)
XP
XP
>SP>LP>EP>FR (page 25)
≥
PDC (For the United Kingdom)
ON
ON
>OFF(jjj)
3) Press [ENTER]
(10) when you have finished making changes.
The Timer Programme List screen appears.
ª
Setting for control of the recording starting and
ending time by special signal Included in the
broadcasting signal (PDC Function)
ending time by special signal Included in the
broadcasting signal (PDC Function)
(For the United Kingdom)
PDC stands for Programme Delivery Control.
If a TV programme, for example a football game runs longer than
scheduled, is shortened or starts earlier or later, this function
synchronizes the recording start and stop with the actual
broadcasting start and stop of the TV programme.
Conditions for correct operation of the PDC function:
≥
PDC stands for Programme Delivery Control.
If a TV programme, for example a football game runs longer than
scheduled, is shortened or starts earlier or later, this function
synchronizes the recording start and stop with the actual
broadcasting start and stop of the TV programme.
Conditions for correct operation of the PDC function:
≥
“ON” must be displayed under [PDC] on the screen.
≥
The TV station must broadcast PDC signals.
≥
The programme starting time must be set correctly to the starting
time listed in the newspaper/magazine.
time listed in the newspaper/magazine.
To activate the PDC Function:
Use [3, 4]
(10) to make the “ON” indication appear.
ª
If “– –” appears under “Name” after entering a
VIDEO Plus+ (G-
VIDEO Plus+ (G-
CODE
) number
Name stands for Programme Position/TV Station Name.
Normally, the name of the TV station or the number of the
programme position is displayed under “Name”.
However, if the TV station information was not automatically set
during Preset Downroad or Auto Setup due to adverse reception
conditions, the “– –” indication appears instead.
In such a case, follow the operation steps below to correct it.
Normally, the name of the TV station or the number of the
programme position is displayed under “Name”.
However, if the TV station information was not automatically set
during Preset Downroad or Auto Setup due to adverse reception
conditions, the “– –” indication appears instead.
In such a case, follow the operation steps below to correct it.
Use [3, 4]
(10) repeatedly to select the programme
position on which the TV programme to be recorded
will be broadcast.
will be broadcast.
After you have entered the information of a TV station, it remains
stored in the unit’s memory, and you do not need to enter it again
in the future.
stored in the unit’s memory, and you do not need to enter it again
in the future.
Note
≥
≥
The built-in clock employs 24-hour system.
≥
The actual time recorded may be longer than the programme
itself when television programmes are recorded using VIDEO
Plus+ (G-
itself when television programmes are recorded using VIDEO
Plus+ (G-
CODE
).
≥
“Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
Reenter the code.
≥
“FULL” is displayed in there are already 16 items programmed.
Delete unnecessary items (page 34).
Delete unnecessary items (page 34).
≥
The remaining time displayed is calculated based on the current
recording mode.
recording mode.
≥
When recording more than one programme in a row, for DVD-
RAM the first few seconds, and for DVD-R about the first 30
seconds of all programmes from the second one onwards will not
be recorded.
RAM the first few seconds, and for DVD-R about the first 30
seconds of all programmes from the second one onwards will not
be recorded.
≥
Recording is not possible unless you set “Disc Protection“ in
“DISC INFORMATION“ to “Off“. (page 37)
“DISC INFORMATION“ to “Off“. (page 37)
≥
You can not record to a disc if the write protect tab on a cartridge
disc is set to protect. Release this before operation (page 73).
disc is set to protect. Release this before operation (page 73).
≥
Even if the unit is put in the timer recording standby mode or the
timer recording is being performed, you can play a programme.
timer recording is being performed, you can play a programme.
≥
If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording starting
time, the [Á] flashes on the unit display. In this case, press the
[Á, TIMER]
latest 10 minutes before the programmed timer recording starting
time, the [Á] flashes on the unit display. In this case, press the
[Á, TIMER]
(12) button to put the unit in the timer recording
standby mode.
SELECT
2:00
1:00
16/ 7 TUE
Mode
Stop
Start
Name
Date
1:58 SP
TIMER
RECORDING
RECORDING
Remain
1:19:00 16.7 TUE
ENTER
SP
RETURN
Press ENTER to store new programme.
PDC
OFF
CANCEL
BBC 1
B.book 32 ページ ２００２年８月５日 月曜日 午後１時１０分