Справочник Пользователя для Panasonic dmr-e75veb
Connection and Set up
16
To record programmes from satellite receiver using “Sky Personal
Planner” function together with the “External Link 1” function of this
DVD Video Recorder:
Planner” function together with the “External Link 1” function of this
DVD Video Recorder:
[1]
Make connections as
shown.
shown.
[2]
Change the settings in
the SETUP menu (
the SETUP menu (
l 49)
as follows.
≥To display the disired setting
items, refer to the page 46.
-“AV1 Output” set to “Video (with
component)” or “RGB (without
component)” to suit the AV
terminal of your TV.
component)” to suit the AV
terminal of your TV.
-“AV2 Input” set to “Video”.
-“AV2 Connection” set to
-“AV2 Connection” set to
“Normal”.
-“Ext Link” set to “Ext Link 1”.
[3]
Set up Personal Planner programmes as
required.
required.
[4]
When you want to record a programme on DVD
(VHS), press [DVD] ([VHS]) and then press [EXT
LINK] button (
(VHS), press [DVD] ([VHS]) and then press [EXT
LINK] button (
l 29, 57).
“External Link 1” function can only be used with the “Sky Personal
Planner” function for timer recording of video signal from the “VCR
Scart” terminal of the Sky Digital Set Top Box.
Planner” function for timer recording of video signal from the “VCR
Scart” terminal of the Sky Digital Set Top Box.
Most Satellite Receivers are capable of outputting RGB signals
(below) for viewing on TV through a Scart terminal (called “TV Scart”
on a Sky Digital STB).
In the case of a Sky Digital STB, recording of RGB signals from the
“TV Scart” terminals is possible, but the “Personal Planner” function
for timer recording cannot be used in conjunction with the “External
Link” function of this DVD Video Recorder.
To record programmes by RGB signals:
(below) for viewing on TV through a Scart terminal (called “TV Scart”
on a Sky Digital STB).
In the case of a Sky Digital STB, recording of RGB signals from the
“TV Scart” terminals is possible, but the “Personal Planner” function
for timer recording cannot be used in conjunction with the “External
Link” function of this DVD Video Recorder.
To record programmes by RGB signals:
[1]
Make connections as
shown.
shown.
[2]
Set your Sky Digital STB
to output “RGB” signals.
to output “RGB” signals.
[3]
Change the settings in
the SETUP menu (
the SETUP menu (
l 49)
as follows.
≥To display the disired setting
items, refer to the page 46.
-“AV1 Output” set to “Video (with
component)” or “RGB (without
component)” to suit the AV
terminal of your TV.
component)” to suit the AV
terminal of your TV.
-AV2 Input” set to “RGB (Not
NTSC)”
-“AV2 Connection” set to “Normal”
[4]
Set up Personal Planner programmes as
required.
required.
[5]
Follow the steps for setting up manually
programming timer programmings (
programming timer programmings (
l 30, 58).
After setting Personal Planner programmes as required, Sky
Digital STB must be left on (not set to standby) to ensure
continuous output of RGB signals.
Digital STB must be left on (not set to standby) to ensure
continuous output of RGB signals.
It is not possible to use the “External Link” function of the DVD
Video Recorder for timer recording of RGB signals from the Sky
Digital STB.
Video Recorder for timer recording of RGB signals from the Sky
Digital STB.
Recording from Set Top Boxes (STB) or other Satellite Receivers (SAT)
∫ Recording video signal by “Sky personal
Planner” and “External Link 1” Functions
DUBBING
VHS
PLAY
AUDIO
EXT LINK
FUNCTIONS
DIRECT NAVIGATOR
TOP MENU
RETURN
SUB MENU
PROG/CHECK
VHS REC
DVD
TIME SLIP
JET REW
STATUS
DISPLAY
DVD REC
REC MODE
TIMER
ENTER
DVD
DVD/VHS
VHS
TRACKING/V-LOCK
CH
AV
VOLUME
DVD
DVD/VHS
DIRECT TV REC
RETURN
OUTPUT
FUNCTIONS
3, 4, 2, 1
ENTER
DVD/VHS
OUTPUT
OUTPUT
EXT LINK
VHS
DVD-Recorder
STB/SAT
AV
TV
AV2
AV1
VCR Scart
∫ Recording RGB Signals
∫RGB
This refers to the three primary colours of light, red (R), green (G),
and blue (B) and also the method of producing video that uses
them. By dividing the video signal into the three colours for
transmission, noise is reduced for even higher quality images. If
your TV is equipped with RGB input capability, by connecting with
a fully wired 21-pin Scart cable you can see video using RGB
output on this unit (PAL only) (
and blue (B) and also the method of producing video that uses
them. By dividing the video signal into the three colours for
transmission, noise is reduced for even higher quality images. If
your TV is equipped with RGB input capability, by connecting with
a fully wired 21-pin Scart cable you can see video using RGB
output on this unit (PAL only) (
l 10).
To output in RGB select “RGB (without component)” from “AV1
Output” in the SETUP menu (
Output” in the SETUP menu (
l 49).
DVD-Recorder
STB/SAT
AV
TV
AV2
AV1
TV Scart
EB.book 16 ページ 2004年4月13日 火曜日 午前9時7分